5.TECHNICAL INFORMATION
General Maintenance
Dust build up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, you should clean your lighting fixtures at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean this fixture, follow the instructions below:
∙Unplug the fixture from power.
∙Wait until the fixture is cold.
∙Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
∙Clean all external glass surfaces with a mild soap solution,
∙Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
∙Softly drag any dirt or grime to the outside of the external glass surface.
∙Gently polish the external glass surfaces until they are free of haze and lint.
Always dry the external glass surfaces carefully after cleaning them.
Page 12 of 18 | Cubix™ User Manual (Rev. 01a) |