Chauvet DJ Equipment user manual Mounting, Orientation, Rigging

Page 7

Mounting

Orientation

The Arena™ Hazer 3 is a haze machine and it uses fluid. Keep this in mind when selecting the orientation, as the fluid will leak out of the fluid reservoir if the unit is not horizontal.

Rigging

When hanging this product overhead, always use all three of the fly points. The cables and structure to which you are hanging the product from must be capable of supporting at least 10 times the weight of the Arena™ Hazer 3. Please see the “Technical Specifications” section of this manual for weight information.

Always consider ease of access to the unit for maintenance and programming purposes before deciding on a location for this product.

Overhead rigging is potentially dangerous and should only be attempted by certified/experienced riggers. The installer/user is responsible for ensuring that the Arena™ Hazer 3 is rigged safely, following current national, state, and local regulations.

CHAUVET® recommends that the unit be inspected every 90 days. If any damage is detected, remedial action should be taken immediately!

Fly point

Fly point

Mounting Diagram

(Side & Front)

Fly point

 

Fly point

 

 

 

 

 

Fly point

 

 

Arena™ Hazer 3 User Manual (Rev. 02)

Page 7 of 16

Image 7
Contents Page Table of Contents Before YOU Begin Product at a Glance Safety NotesProduct Overview IntroductionAC Power SetupResetting the Breaker Orientation MountingRigging DMX Channel Assignments and Values OperationControl Panel Operation Menu MapStarting Address Configuration DMX ModeTimer Mode Configuration Stand-alone ModesVolume Mode Technical Information General MaintenanceStorage Symptom Possible Cause Possible Action General TroubleshootingContact Information Returns ProcedureFixture Linking Daisy Chain DMX PrimerDMX Cabling DMX ConnectorsPower Technical Specifications