JOG Wheel Fucntions

JOG WHEEL TOUCH SENSITIVITY: The platter of the jog wheel is touch sensitive allowing certain play and cue commands, as well the scratch effect, to be controlled by touching or tapping on the touch sensitive jog wheel.

ADJUSTING JOG WHEEL TOUCH SENSITVITY: The degree of sensitivity can be adjusted to make it more or less sensitive. Press and hold the FOLDER KNOB (1) to enter the INTERNAL MENU. Turn the FOLDER KNOB (1) clockwise till SENSITIVITY is displayed. Turn the TRACK KNOB (21) to find your desired sensitivity, the range of sensitivity is from -20 to +20. The VFD (23) will display the degree of sensitivity. When you have found your desired level press the FOLDER KNOB (1) to confirm and exit.

A.CUE: Before you can use the JOG WHEEL (16) to control the play and cue commands you must first activate the A.Cue Mode. To activate press the A.CUE BUTTON (9).

Figure 32

IN PLAYBACK MODE: While in play mode and with the A. Cue Mode active, the JOG WHEEL (16) can be used to return the unit to last cue point. Simply touch the JOG WHEEL (16) and unit will immediately return to the last set cue point and playback without music interruption.

Figure 33

IN CUE MODE: While in cue or pause mode and with the A. Cue Mode active, touching or tapping on the JOG WHEEL (16) can be used to start playback. The unit will continue to playback until the JOG WHEEL (16) is released. Once the JOG WHEEL (16) is released the unit will return to the last cue point.

Figure 34