LED ON/OFF LED Type | American Audio Versadeck guide

MIDI MAP

CUE PAN	VR	34	73	VR:00~7F
SLIDER	VR
SLIDER
CUE PAN	VR	33	72	VR:00~7F
LEVEL	VR
LEVEL
Fader Start	SW	1	40	7FH_ON
ON(L)	SW			00H_OFF
ON(L)				00H_OFF
Fader Start	SW	2	41	7FH_ON
OFF(L)	SW			00H_OFF
OFF(L)				00H_OFF
Fader Start	SW	3	42	7FH_ON
ON(R)	SW			00H_OFF
ON(R)				00H_OFF
Fader Start	SW	4	43	7FH_ON
OFF(R)	SW			00H_OFF
OFF(R)				00H_OFF
C.F CURVE	SW	7	46	7FH_ON
(L)	SW			00H_OFF
(L)				00H_OFF
C.F CURVE	SW	6	45	7FH_ON
(CENTER)	SW			00H_OFF
(CENTER)				00H_OFF
C.F CURVE	SW	5	44	7FH_ON
(R)	SW			00H_OFF
(R)				00H_OFF

CC-ABSOLUTE (VR, LEVEL METER LED) TYPE

Control Change messages are sent with status 0xBn, where n is the channel, for the specified CC controller. Thus the controller MIDI ID is indicated with the channel along with the CC number. The value from 0x00 to 0x7F, directly related to the location of the controller.

*LEVEL METER LEDS

00~0B => ALL LEDS OFF 0C~17=>LED(-30) ON 18~23=>LED(-30, -20) ON 24~2F=>LED(-30, -20, -10) ON 30~3B=>LED(-30, -20, -10, -7) ON 3C~47=>LED(-30, -20, -10, -7, -4) ON 48~53=>LED(-30, -20, -10, -7, -4, -2) ON 54~5F=>LED(-30, -20, -10, -7, -4, -2, 0) ON 60~6B=>LED(-30, -20, -10, -7, -4, -2, 0, +2) ON 6C~77=>LED(-30, -20, -10, -7, -4, -2, 0, +2, +4) ON

78~7F=> ALL LEDS ON (-30, -20, -10, -7, -4, -2, 0, +2, +4, +7)

CC-RELATIVE (ENC)TYPE

Control Change messages are status 0xBn, where n is the channel, for the specified CC controller. Thus the controller MIDI ID is indicated with the channel along with the CC number. The value from 0x40 to indicate the change in the controller. This is an offset to 0x40 “one’s complement” notation.

A message with data 0x43 indicates a positive change of 3. A messages with data 0x31 indicates a negative change of 15.

SWITCH ON/OFF (SW,CENTER TYPE)

These messages are used for switches.

Control Change messages are sent with status 0x9n, SWITCH On and Off value are 0x7F and 0x00, where n is the channel.

LED ON/OFF (LED TYPE)

These messages are used for LED.

Control Change messages are sent with status 0x9n, LED On and Off value are 0x7F and 0x00, where n is the channel.