American Audio Versadeck manual Playlist Operation, Relay FLIP-FLOP, Relay Mode

Page 33

PLAYLIST OPERATION

Playlist Operation:

1.Press and hold the FOLDER KNOB (1) for 3 sec. to enter the internal menu. Turn the knob until "PLAYLIST" is displayed.

2.Turn TRACK KNOB (21) to scroll through "Normal/Title/Artist/Album/Genre". Press the FOLDER KNOB (1) to save your desired selection and exit. The database should adjust to your setting.

Example: "Artist" is selected, all artists will be in alphabetical order

Pushing and turning the FOLDER KNOB will take you to the next letter; so if you are going through the C artists, holding and turning the FOLDER KNOB will skip you up to the D artists.

You can turn the FOLDER KNOB, or push the FOLDER KNOB in and turn the JOG WHEEL to jump to the next artist.

You can skip through tracks by turning the TRACK KNOB, or by pressing the TRACK KNOB and turning the JOG WHEEL as well.

RELAY (FLIP-FLOP™)

RELAY MODE

This feature is a kind of “auto pilot”. When you are using the VERSADECK system, you can have one player begin playback when the other ends. You can RELAY single tracks, the entire folder, or a combination of the two.

To RELAY single tracks:

1) Set the mixer's crossfader to the center position, and press the RELAY BUTTON (34).

2) Set the two players to playback in single mode, SINGLE (72) should be indicated in the VFD (23).

3) Load your two players with audio discs.

4) After they have both cued, press the PLAY/PAUSE BUTTON (13) on one player to begin playback.

5) After the first player’s single track has ended the second player’s track will immediately begin playback.

6) FLIP-FLOP™ will continue until you stop it or power is interrupted.

To Flip-Flop entire folders:

Be sure your players are both in continuous play mode, make sure SINGLE MODE (72) does not appear in the VFDS (23) of both players. Follow all directions for single track RELAY above. When one player’s folder ends the other player will immediately begin playback.

Note: You may combine RELAY single and continuously playback modes by selecting either single or continu- ous playback on your units.

©American Audio® - www.AmericanAudio.us - VERSADECK Instruction Manual Page 33

Image 33
Contents Versadeck Contents Do not open Risk of electric shock Important InformationElectrical Precautions Electrical Safety PrecautionsSafety Instructions Unpacking Balanced XLR Outputs Main FeaturesSET-UP Checking the ContentsPlayer General Functions and ControlsCDJ Mode Cue Scratch ModeEffects and Hold Button Search Buttons22.IN, OUT, & Reloop Buttons PlayerTOP Unit Mixer Controls Figure General Functions and Controls Front Panel Figure Front & Rear PanelFront & Rear Panel VFD Display Panel Figure VFD Screen Crossfader Internal MenuBasic Operations LOADING/EJECTING AN USB DeviceSelecting Tracks Starting Playback Figure Pausing FigureAuto CUE Stopping Playback Figures 10Setting a CUE Point Creating and Playing a Seamless Loop Press PLAY/PAUSE Button 13 to activate playback modeChanging the Time Display 66/TIME BAR Editing a LoopTo store a loop Bank ButtonsPitch Adjustments Pitch AdjustmentsPitch Slider Pitch Bend Buttons Pitch BendingJOG Wheel JOG Wheel Fucntions JOG Wheel Fucntions BUILT-IN Effects Parameters Relay Mode Playlist OperationRelay FLIP-FLOP RAM 512MB RAM Database BuilderScan and Create Database Builder for Windows XPDatabase Builder Midi MAP Meter LED ON/OFF LED Type Mixer SET-UP American Audio Crossfader Replacement Files TroublshootingYear Limited Warranty Specifications USB Slave Player Section Signal Format MP3, 128KBPS USB Host Player Section Signal Format MP3, 128KBPSChannel Channel FaderMP3 Format