Digital Echo, Vocal Cancel | VocoPro KJ-7000 Pro guide

Advanced Operations

Digital Echo

Customizing Digital Echo settings

When using Digital Echo, you can customize the effect by adjusting the ECHO, REPEAT and DELAY controls. First set the ECHO level control to 5. Then customize the effect with the REPEAT and DELAY level controls. REPEAT adjusts the interval repetition of the echo effect. As more REPEAT is applied, more echo intervals will be heard when using it and vice versa. DELAY adjusts length of each interval. As more DELAY is applied, there will be more “space” between the starting and ending point of each echo. When the Digital Echo effect is customized, adjust the ECHO level control as you would a master level control.

ECHO

010

REPEAT

010

DELAY	5	Increase	Decrease
DELAY

010

Digital

Echo

Vocal Cancel

Utilizing Vocal Cancel Modes

The VOCAL CANCEL toggle switch can be set to 3 modes: ON/OFF/AUTO. When the toggle is set to ON, it is on VOCAL CANCEL mode. VOCAL CANCEL will cancel out the vocal layer of a track on multiplexed Karaoke media, while letting the background music through. When the toggle is set to OFF, there is no cancellation.

When the toggle is set to AUTO, it is in VOCAL PARTNER mode. VOCAL PARTNER mode is similar to an “auto-pilot” mode. In this mode, the vocal layer will be cancelled only as long there is Mic activity present. When there is no Mic/Line activity present, the vocal layer is brought back in. In other words, when you are singing, the vocal layer is cancelled. And when you are not singing, the vocal layer is brought back in. This mode is commonly used when a solo singer wants to sing a duet, as the “other singer” comes in automatically.

AUTO - (V. Partner)

OFF - (None)

ON - (V. Cancel)

VOCAL CANCEL

Note: In order for any of the Vocal Cancel modes to work properly, you will need to be using Multiplexed discs.