VocoPro KJ-7000 Pro owner manual KJ7000 Pro Features, Mounting

KJ7000 Pro Features

•New space saving rack design, just 6 spaces!

•Loaded with 7 Input Channels: 4 Mic, 2 switchable AV/Phono and 1 switchable AV/Line.

•Channel features include: Gain, Bass, Treble, Echo, Key Control and XLR or 1/4 “ jack options.

•3 Video Inputs/Outputs for multi-screen video options

•Convenient On-board Video Switching making video syncing a snap!

•Assignable 11-step Digital Key Controller (1/2 tone per step)

•Professional Digital Echo with Repeat and Delay controls

•On-board Vocal Cancel and Talkover with Automatic Mode

•5-Band Graphic Equalizer for precise room tuning

•Booth/Monitor Outputs, Balanced Master Outputs (XLR), Unbalanced Master Outputs (RCA) and Record Outputs.

•Independent Effect Send and Return for each Mic Channel

•Assignable Crossfader

•12V Light Jack for lamp connection

Mounting

To mount, carefully place the KJ-7000 Pro in the rack space of your case. The KJ-7000 Pro takes 4 screws to mount. Make sure holes are aligned evenly. Use an alternating “X” rotation when screwing to ensure even tension and alignment.

(See diagram below)	1	3
	4
You will need:		2
• 19" Rack Case
• 4 Mount Screws
• Phillips-head Screwdriver

Note:

When top mounting, make sure you have at least 2 rack-spaces available.

7