Getting Connected

Connecting A/V Source Players to the DA-2277

For each A/V source player, you will need an A/V patch cable (red, white and yellow plugs).

•Connect one set of red and white plugs to the AUDIO OUT jacks on your source player and the yellow plug to the VIDEO OUT jack on your source player.

•Connect the other set of red and white plugs to an AUDIO IN jacks of your choice (VCD, LD, CDG, DVD) on the DA-2277 and connect the yellow plug to the VIDEO IN jack corresponding to the same channel you connected the audio to.

3/L BALANCED OUT 3/R

A4/VCD

A3/LD

A2/CDG

A1/DVD

V3/LD

V1/DVD

MIC OUT ONLY

VIDEO

OUT

ANT2

ANT 1

www.vocopro.com

ANT 1

AUDIO OUT

AUDIO IN

V4/VCV

V2/CDG

SERIAL NUMBER	!	CAUTION
115	W ARNING:T O REDUCETHE RISK OF
	FIRE OR ELECTRICALSHOCK		AC OUTPUT
	DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE

SOURCE PLAYER

AUDIO OUT

VIDEO OUT

Connecting Audio Output to External Amplifiers, Mixers or Recording Devices

•For AUDIO OUTPUT connections, there are 4 possible connections that can be made simultaneously: unbalanced RCA (x2), balanced XLR (x1) and isolated microphone 1⁄4" (x1).

•For each unbalanced RCA AUDIO OUTPUT connection, connect a paired RCA patch cable from the AUDIO IN, LINE IN or CH. A-B jacks on your external devices to the AUDIO OUT jacks (1) or (2) on the DA-2277.

•For a balanced AUDIO OUTPUT connection, connect XLR audio cables from the AUDIO IN, LINE IN or CH. A-B jacks on your external device to the AUDIO OUT jacks (3/L-3/R) on the DA-2277.

•For an isolated MICROPHONE OUTPUT connection, connect a 1⁄4" audio patch cable from the AUDIO IN or LINE IN jacks on your external device to the (4) MIC ONLY –56dBv jack on the DA-2277.