CONNECTIONS (CONNECTING MICROPHONE AND HEADPHONES/CONNECTING THE POWER CORD)

CONNECTING MICROPHONE AND HEADPHONES

Microphone

The MIC 1 jack on the upper surface of the operating panel can be used to connect a microphone with Ø6.3 mm phone plug or XLR plug.

The MIC 2 jack on the upper surface of the operating panel can be used to connect a microphone with Ø6.3 mm phone plugs.

When the connection panel’s MIC SIGNAL switch is set to [CUT], no microphone sounds will be output from the BOOTH monitor output connectors.

Microphone 1

(Microphone 1)

MIC

MIC 1

MIC 2

 

MIC 1

 

LEVEL

 

0

 

MIC 2

Microphone 2

LEVEL

0

 

 

HI

-12

+6

EQ

LOW

-12 +6

Headphones

The PHONES jack on the upper surface of the operating panel can be used to connect headphones with a Ø6.3 mm stereo phone plug.

HEADPHONES

MONO SPLIT STEREO

MIXING

CUE MASTER

LEVEL

0

PHONES

Headphones

English

MIC

OFF ON TALK

OVER

CONNECTING THE POWER CORD

Connect the power cord last.

÷After completing all other connections, connect the accessory power cord to the AC inlet on the back of the player, then connect the plug to a standard wall outlet or to the auxiliary power outlet of your amplifier.

÷Use only the supplied power cord.

7

<DRB1392> En

Page 7
Image 7
Pioneer DJM-800 Connecting Microphone and Headphones, Connecting the Power Cord, Connect the power cord last