Select button, Channel status LED indicators

Caution!

Also, it is a good practice to physically disconnect any and all valuable electronics from the AC mains during electrical storms, as a lightning strike anywhere near your home can put a tremendous surge on the AC mains that can easily damage any piece of electronics, no matter how well designed and protected. The best protection in the case of severe electrical storms is to simply remove the electronics from any connection with the power grid.

2Select button

The Select button is used (along with the Mode button) when conﬁguring the ampliﬁer for either balanced or single-ended operation. It is also used when conﬁguring the turn-on delay or ampliﬁer number for an ampliﬁer connected to a Classé preampliﬁer by the DC Trigger or CAN Bus control systems.

3Channel status LED indicators

Each ampliﬁer channel has two Channel LED indicators. They are used to indicate the use of either balanced (XLR) or single-ended (RCA) inputs for that channel.

These indicators are also used to indicate fault conditions in your ampliﬁer, should any ever arise. If a channel’s LED indicators blink red, there is a problem in that particular channel. If all the Channel LEDs are blinking red, there may be a systemic problem that is not speciﬁc to a particular channel.

If you see any Channel LED Indicator blinking red, please disconnect the ampliﬁer from the AC mains immediately and check that all external connections are cleanly made and secure. If the AC mains are not easily accessible, you can press and hold the Standby button for three seconds to reset the ampliﬁer. If no fault is immediately obvious, please call your authorized Classé dealer for assistance.

4Mode button

The Mode button is used (along with the Select button) when conﬁguring the ampliﬁer for either balanced or single-ended operation. It is also used when conﬁguring the turn-on delay and ampliﬁer number of the ampliﬁer when it is connected to a Classé preampliﬁer by the CAN Bus communications or Trigger systems.

CA-2200 specifications

The Classe Audio CA-2200 is a power amplifier that represents the pinnacle of engineering excellence and audiophile performance. Designed for those who seek uncompromising sound quality and reliability, it has established itself as a favorite among music enthusiasts and professionals alike. This amplifier combines advanced technology with thoughtful design, ensuring that it delivers pristine audio reproduction across a range of audio systems.

One of the standout features of the CA-2200 is its robust power output. With a rated power of 200 watts per channel into 8 ohms, and even more impressive performance at lower impedances, the amplifier can drive a variety of speakers effectively while maintaining clarity and detail in the sound. This versatility allows it to be seamlessly integrated into both stereo and multi-channel setups, making it an ideal choice for audiophiles with diverse listening preferences.

The CA-2200 employs a Class AB amplifier topology, which strikes a perfect balance between efficiency and audio fidelity. This design minimizes distortion and maximizes the dynamic range, allowing the amplifier to reproduce the subtlest nuances of music, from the softest whispers to the most thunderous crescendos. Additionally, the use of high-quality components, including custom-engineered toroidal transformers and audiophile-grade capacitors, further enhances its performance and reliability.

Another notable characteristic of the CA-2200 is its sophisticated thermal management system. The amplifier features large heat sinks and a well-ventilated chassis that allows for optimal cooling, ensuring that it operates efficiently even during extended listening sessions at high volumes. This attention to detail prevents overheating and extends the lifespan of the components, making it a durable and long-term investment for any audio enthusiast.

In terms of connectivity, the Classe Audio CA-2200 is equipped with both balanced XLR and unbalanced RCA inputs, allowing for flexibility in integrating it into various audio systems. The amplifier also includes a triggered power-up feature, enabling convenient operation with compatible audio components.

In summary, the Classe Audio CA-2200 stands out as a high-performance power amplifier renowned for its exceptional audio quality, robust construction, and thoughtful design features. Whether utilized in a two-channel stereo setup or as part of a home theater system, it offers an immersive listening experience that faithfully reproduces the artist's intent, making it a worthy addition to any serious audio system.