Initial Setup, Conﬁgure your ampliﬁer

Important:

conﬁguring balanced/ single-ended operation

Initial Setup

Your new Classé ampliﬁer is quite simple to set up and enjoy. Please follow the steps outlined below in order to safely set up and use your new ampliﬁer.

The AC mains connection should be the last connection you make on your new power ampliﬁer. In addition, it is always a good idea to power up your power ampliﬁer(s) last, after everything else has been powered up and has stabilized. .

Conversely, it is good practice to power the ampliﬁer(s) down ﬁrst when shutting down the system, as this prevents any transients from other components from getting through to your loudspeakers.

1.Unpack everything according to the included instructions. Be careful when doing so, as this ampliﬁer is quite heavy.

2.Place your ampliﬁer (be sure to read “Unpacking and Placement”) and connect it to the AC mains.

This includes deciding on the location, making sure you have adequate ventilation, and adequate clearance for all the wires behind the ampliﬁer. Once accomplished, connect the ampliﬁer directly to the AC mains. Do not use extension cords, as most are not suitable for the current sometimes required by your ampliﬁer.

3.Conﬁgure your ampliﬁer.

The Select and Mode buttons are used when conﬁguring your ampliﬁer for how you would like it to operate.

While in standby, pressing the Select button will cause the Channel LEDs to light up, indicating how the ampliﬁer is currently conﬁgured (either balanced or single-ended) for each channel.

One of the Channel LED indicators will be blinking, indicating that you may select either balanced or single-ended operation for that channel. Press the Mode button to toggle between either the balanced mode or the single- ended mode of operation, as indicated by which of the two channel LEDs for that channel is blinking.

Press the Select button again to select the other channel, and press the Mode button to select the conﬁguration for that channel.

To ﬁnish, press and release the Select button until both Channel LEDs are off.

Make sure you conﬁgure the ampliﬁer to use the type of input connection you will be using.

CA-2200 specifications

The Classe Audio CA-2200 is a power amplifier that represents the pinnacle of engineering excellence and audiophile performance. Designed for those who seek uncompromising sound quality and reliability, it has established itself as a favorite among music enthusiasts and professionals alike. This amplifier combines advanced technology with thoughtful design, ensuring that it delivers pristine audio reproduction across a range of audio systems.

One of the standout features of the CA-2200 is its robust power output. With a rated power of 200 watts per channel into 8 ohms, and even more impressive performance at lower impedances, the amplifier can drive a variety of speakers effectively while maintaining clarity and detail in the sound. This versatility allows it to be seamlessly integrated into both stereo and multi-channel setups, making it an ideal choice for audiophiles with diverse listening preferences.

The CA-2200 employs a Class AB amplifier topology, which strikes a perfect balance between efficiency and audio fidelity. This design minimizes distortion and maximizes the dynamic range, allowing the amplifier to reproduce the subtlest nuances of music, from the softest whispers to the most thunderous crescendos. Additionally, the use of high-quality components, including custom-engineered toroidal transformers and audiophile-grade capacitors, further enhances its performance and reliability.

Another notable characteristic of the CA-2200 is its sophisticated thermal management system. The amplifier features large heat sinks and a well-ventilated chassis that allows for optimal cooling, ensuring that it operates efficiently even during extended listening sessions at high volumes. This attention to detail prevents overheating and extends the lifespan of the components, making it a durable and long-term investment for any audio enthusiast.

In terms of connectivity, the Classe Audio CA-2200 is equipped with both balanced XLR and unbalanced RCA inputs, allowing for flexibility in integrating it into various audio systems. The amplifier also includes a triggered power-up feature, enabling convenient operation with compatible audio components.

In summary, the Classe Audio CA-2200 stands out as a high-performance power amplifier renowned for its exceptional audio quality, robust construction, and thoughtful design features. Whether utilized in a two-channel stereo setup or as part of a home theater system, it offers an immersive listening experience that faithfully reproduces the artist's intent, making it a worthy addition to any serious audio system.