Troubleshooting, Ampliﬁer keeps shutting off

Troubleshooting

In general, you should refer any service problems to your Classé dealer. Before contacting your dealer, however, please check to see if the problem is listed here.

1.No sound, and no Channel LED is lit.

•The ampliﬁer is not plugged into the AC mains, or the AC mains are down (circuit breaker, fuse).

•A brown-out or short-term loss of power might require the internal microprocessor to be reset. Unplug the unit for at least 30 seconds and then plug it in again and try powering it up.

•The AC mains fuse is blown. See Troubleshooting #4, below (or contact your Classé dealer).

•The AC mains is out of range. Check the voltage speciﬁed on the rear panel.

2.No sound, and one or more Channel LEDs is blinking red.

•Your protection circuitry may have been engaged. To reset the ampliﬁer, press and hold the Standby button for 3 seconds to power down the ampliﬁer. Then disconnect all inputs and outputs.

•Then try powering up the ampliﬁer by pressing the Standby button. If the LED continues to blink, there is a fault condition in the ampliﬁer itself. It should be powered down, disconnected from the AC mains and taken to your Classe dealer for service.

•If it powers up without any difﬁculty, power it back down and reconnect only the inputs. Then restart the ampliﬁer. If it goes into its blinking protection mode, something is wrong with a component “upstream” of the ampliﬁer—probably a DC offset or similar problem. Your ampliﬁer is trying to protect your loudspeakers (even small amounts of DC can damage woofers in relatively little time). Try different source components to discover whether the problem is limited to a single source, or exists all the time (which would indicate a problem with the preampliﬁer). Contact your dealer for help with the appropriate component.

3.The ampliﬁer keeps shutting off.

•Make sure you are providing adequate ventilation to the ampliﬁer, and that the ambient room temperature is below 105°F (40°C).

•Run through the troubleshooting sequence outlined above (assuming the ampliﬁer is going into its protection mode).

CA-2200 specifications

The Classe Audio CA-2200 is a power amplifier that represents the pinnacle of engineering excellence and audiophile performance. Designed for those who seek uncompromising sound quality and reliability, it has established itself as a favorite among music enthusiasts and professionals alike. This amplifier combines advanced technology with thoughtful design, ensuring that it delivers pristine audio reproduction across a range of audio systems.

One of the standout features of the CA-2200 is its robust power output. With a rated power of 200 watts per channel into 8 ohms, and even more impressive performance at lower impedances, the amplifier can drive a variety of speakers effectively while maintaining clarity and detail in the sound. This versatility allows it to be seamlessly integrated into both stereo and multi-channel setups, making it an ideal choice for audiophiles with diverse listening preferences.

The CA-2200 employs a Class AB amplifier topology, which strikes a perfect balance between efficiency and audio fidelity. This design minimizes distortion and maximizes the dynamic range, allowing the amplifier to reproduce the subtlest nuances of music, from the softest whispers to the most thunderous crescendos. Additionally, the use of high-quality components, including custom-engineered toroidal transformers and audiophile-grade capacitors, further enhances its performance and reliability.

Another notable characteristic of the CA-2200 is its sophisticated thermal management system. The amplifier features large heat sinks and a well-ventilated chassis that allows for optimal cooling, ensuring that it operates efficiently even during extended listening sessions at high volumes. This attention to detail prevents overheating and extends the lifespan of the components, making it a durable and long-term investment for any audio enthusiast.

In terms of connectivity, the Classe Audio CA-2200 is equipped with both balanced XLR and unbalanced RCA inputs, allowing for flexibility in integrating it into various audio systems. The amplifier also includes a triggered power-up feature, enabling convenient operation with compatible audio components.

In summary, the Classe Audio CA-2200 stands out as a high-performance power amplifier renowned for its exceptional audio quality, robust construction, and thoughtful design features. Whether utilized in a two-channel stereo setup or as part of a home theater system, it offers an immersive listening experience that faithfully reproduces the artist's intent, making it a worthy addition to any serious audio system.