Classe Audio CA-2200 specs

warm up/break-in period

please read this manual…

The CA-2200 includes protection circuitry that will prevent the ampliﬁer from operating at dangerously high or low voltages.

•At startup: the AC mains voltage must be within a range of approximately -15% to +10% of its nominal value at startup, or the ampliﬁer will not turn on. For example, a 120V unit requires the AC mains to be between approximately 95V–135V in order to turn on.

•Over-voltage during operation: if the AC mains voltage surges by roughly 10% or more during operation, the ampliﬁer will enter protection mode and shut down. The Standby LED will ﬂash to indicate the protection mode has been engaged.

•Under-voltage during operation: if the AC mains voltage sags by 15% or more, the ampliﬁer will continue to play (since this does not present a particular danger to the ampliﬁer), but note that

it may not be able to achieve its usual standard of performance under these compromised conditions. The Standby LED will ﬂash to indicate the condition.

Your new Classé power ampliﬁer will deliver outstanding performance immediately. However, you should expect to hear it improve somewhat as it reaches its normal operating temperatures and its various components “break-in.” It has been our experience that the greatest changes occur within the ﬁrst 300 hours, as the ampliﬁer reaches thermal equilibrium and the capacitors fully form. After this initial break-in period, the performance of your new product should remain quite consistent for years to come.

The only exception to this rule is if the unit is placed in standby or unplugged for an extended period of time, allowing it to cool down. Depending on the degree of cooling involved, you should expect a brief warm-up period before the power ampliﬁer’s sound quality is at its best. Unless your ampliﬁer was allowed to become quite chilled, subsequent thermal re-stabilization should not take long. Fortunately, you should never have to repeat the initial 300 hour break-in period.

Please take a few minutes to review this manual, and to familiarize yourself with your new ampliﬁer. We understand that you are anxious to plug everything in and get started. However, reading this manual and following the advice it gives will ensure that you get all the beneﬁts you deserve from having purchased such a ﬁne piece of equipment.

CA-2200 specifications

The Classe Audio CA-2200 is a power amplifier that represents the pinnacle of engineering excellence and audiophile performance. Designed for those who seek uncompromising sound quality and reliability, it has established itself as a favorite among music enthusiasts and professionals alike. This amplifier combines advanced technology with thoughtful design, ensuring that it delivers pristine audio reproduction across a range of audio systems.

One of the standout features of the CA-2200 is its robust power output. With a rated power of 200 watts per channel into 8 ohms, and even more impressive performance at lower impedances, the amplifier can drive a variety of speakers effectively while maintaining clarity and detail in the sound. This versatility allows it to be seamlessly integrated into both stereo and multi-channel setups, making it an ideal choice for audiophiles with diverse listening preferences.

The CA-2200 employs a Class AB amplifier topology, which strikes a perfect balance between efficiency and audio fidelity. This design minimizes distortion and maximizes the dynamic range, allowing the amplifier to reproduce the subtlest nuances of music, from the softest whispers to the most thunderous crescendos. Additionally, the use of high-quality components, including custom-engineered toroidal transformers and audiophile-grade capacitors, further enhances its performance and reliability.

Another notable characteristic of the CA-2200 is its sophisticated thermal management system. The amplifier features large heat sinks and a well-ventilated chassis that allows for optimal cooling, ensuring that it operates efficiently even during extended listening sessions at high volumes. This attention to detail prevents overheating and extends the lifespan of the components, making it a durable and long-term investment for any audio enthusiast.

In terms of connectivity, the Classe Audio CA-2200 is equipped with both balanced XLR and unbalanced RCA inputs, allowing for flexibility in integrating it into various audio systems. The amplifier also includes a triggered power-up feature, enabling convenient operation with compatible audio components.

In summary, the Classe Audio CA-2200 stands out as a high-performance power amplifier renowned for its exceptional audio quality, robust construction, and thoughtful design features. Whether utilized in a two-channel stereo setup or as part of a home theater system, it offers an immersive listening experience that faithfully reproduces the artist's intent, making it a worthy addition to any serious audio system.