Behringer BCF2000-WH manual USB-Mode U-4 expanded

Page 11

B-CONTROL

FADER BCF2000-WH

USB-Mode U-4 (expanded):

 

Fig. 4.4: Routing and use in USB mode 4

This operating mode should be selected if you want to couple two B-CONTROLs to control your software using both B-CONTROLS through a common USB port. Additionally, MIDI OUT B of the first controller (unit 1) can be used from the computer as a 16-channel MIDI output. The data of both B-CONTROLs is mixed and is sent to the host computer via USB. Select stand- alone mode 3 for the second unit (unit 2).

4. OPERATION

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Version 1 Control FaderControl Fader BCF2000-WH Important Safety PrecautionsControl Fader Foreword Table of ContentsSystem requirements IntroductionIntroduction to Midi Before you get startedExample Midi standardMidi connections Midi formatMidi Thru Control Elements and ConnectionsNrpn SysEx DumpSerial Number USB modes USB mode U-1Operation Operating modesMidi Thru and forwards Midi in data unchanged. OUT B is not OUT B connector. This way, you can use a master keyboard toYour B-CONTROL sends Midi data to the computer and receives ApplicationsUSB-Mode U-4 expanded Stand Alone-Mode S-2 Stand-alone modesEffects unit. If additional Midi devices need to be talked Stand Alone-Mode S-3 Stand Alone Mode S-4Control to Midi in of the second B-CONTROL. OUT a Second B-CONTROL needs to be connected to the Midi inputProgramming Play mode menuProgramming in Edit mode Table explanation Assignment of the push encoders in Edit mode Switch typesMidi messages GS/XG Parameter Main Controls Settings in the global setup menuPush encoder allocation in global setup menu Additional functions Global Edit SetupEmulation Modes Standard Midi Controller AppendixMidi note number assignment SpecificationsWarranty Federal Communications Commission Compliance Information Control Fader BCF2000-WHControl Fader BCF2000-WH
Top Page Image Contents