Behringer BCF2000-WH manual Serial Number

Page 8

B-CONTROL FADER BCF2000-WH

Fig. 3.1: The control surface of the B-CONTROL

Fig.3.2: The back of the B-CONTROL

Use the POWER switch to switch on the B-CONTROL. Before connecting the B-CONTROL to the power mains, ensure that the POWER switch is in OFF position. To disconnect the unit from the mains network, pull the plug from the socket. When switching on the B-CONTROL, ensure that the mains plug is easily accessible.

+Please note: The POWER switch does not fully disconnect the unit from the mains power cord plug or extention cord. To disconnect the unit from the main power source, pull out the main cord plug or appliance coupler. When installing the product, ensure the plug or appliance coupler is readily operable. Unplug the power cord when the unit is not used for a prolonged period of time.

The connection to the mains is established using a standard connection socket. A matching cable is included in the shipment.

SERIAL NUMBER.

The USB connector is used for connecting to a computer with a compatible USB input.

8	3. CONTROL ELEMENTS AND CONNECTIONS

Image 8

Contents Control Fader Version 1Important Safety Precautions Control Fader BCF2000-WHControl Fader Table of Contents ForewordIntroduction Introduction to MidiBefore you get started System requirementsMidi standard Midi connectionsMidi format ExampleControl Elements and Connections NrpnSysEx Dump Midi ThruSerial Number USB mode U-1 OperationOperating modes USB modesOUT B connector. This way, you can use a master keyboard to Your B-CONTROL sends Midi data to the computer and receivesApplications Midi Thru and forwards Midi in data unchanged. OUT B is notUSB-Mode U-4 expanded Stand-alone modes Stand Alone-Mode S-2Stand Alone-Mode S-3 Stand Alone Mode S-4 Control to Midi in of the second B-CONTROL. OUT aSecond B-CONTROL needs to be connected to the Midi input Effects unit. If additional Midi devices need to be talkedPlay mode menu ProgrammingProgramming in Edit mode Assignment of the push encoders in Edit mode Switch types Table explanationMidi messages GS/XG Parameter Main Controls Settings in the global setup menuPush encoder allocation in global setup menu Additional functions Global Edit SetupEmulation Modes Appendix Standard Midi ControllerSpecifications Midi note number assignmentWarranty Control Fader BCF2000-WH Federal Communications Commission Compliance InformationControl Fader BCF2000-WH