Ashly WR-1, WR-2 Output Audio Functions, 1i Ducker, 1j Matrix Routing, 1k Remote Level Control

Page 14

Operating Manual - ne24.24M Matrix Processor

8.1i Ducker

A Ducker is used to attenuate the level of selected input channels when one or more "Trigger" inputs have signal present. Input channels can be set to one of four ducker modes:

1.) BYPASS - no ducking action applies.

2.) DUCKED PROGRAM - signal present on other "Trigger" selected input chan- nels act to attenuate this input channel.

3.) LOW PRIORITY TRIGGER - signal present on this input channel attenuates all other inputs set to "Ducked Program".

4.) HIGH PRIORITY TRIGGER - signal present on this input channel fully attenu- ates all other inputs set to "Ducked Program", as well as all other channels set to "Low Priority Trigger".

5.) FILIBUSTER - signal present on this channel fully attenuates all other channels until the signal drops below its threshold to allow other channels to come on.

TRIGGER THRESHOLD determines the signal level on a trigger input at which point the ducked program is attenuated. DUCKING DEPTH determines how much attenuation is applied to input channels set up as ducked pro- gram. DUCKING RELEASE determines the rate at which the attenuation returns to 0dB

after the trigger input signal has stopped.

8.1j Matrix Routing

Any input channel can be routed to any or all output channels, likewise any output channel can have as its source any or all inputs, limited only by the installed capacity of input or output expansion modules. To route an input to an output, click and drag from the input connect box to the desired output connect box (click and drag routing works in both directions). To delete a connection, click on the connect line and press <Delete> on the keyboard, or right click on the connection line for the delete prompt. To quickly perform multiple routing connections or disconnections to the current input channel, hold <Ctrl> and click on desired individual output channel connect boxes to toggle them on or off. Anytime a connection is made, the corresponding output mixer level is set to “-inf”, (off).

8.1k Remote Level Control

Each channel can be remotely attenuated through the back panel 0-5V Remote Level Control pins, or by an Ashly RD8C active remote attenuator connected to

the 4-pin data connector on the back. The Remote Level Controls dialogue box then allows arbitrary assignment of the remote’s attenuator channels to the ne24.24M’s audio channel.

8.2 Output Audio Functions

The following functions are available on all outputs: Mixer, High

Pass/Low Pass Filter, Delay, EQ, Gain, Limiter, and Mute.

8.2a Output Matrix Mixer

Output channels can have any or all inputs as sources, and the output matrix mixer allows the level of each connected input to be adjusted in the “matrix mix” to each output. Note that for a given output, unlinked inputs are disabled in the mixer. Adjustment range is from +12dB to off. To set a level control to unity (0) within the matrix mixer, select an input level control by clicking on it and pressing <ctrl> + <click> on the level adjust- ment control. Individual input channels in the matrix mixer can be muted independently from the main input or output mute blocks.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating Manual Ashly Audio INCTable Of Contents This Apparatus Must be Earthed Unpacking AC Power RequirementsIntroduction Front Panel Features Input Connections Rear Panel FeaturesLogic Inputs Preset Recall Output Connections10/100 Ethernet Control Jack 0-5V Remote Level ControlAC Inlet and Power Switch Expansion Module InstallationFactory Reset Switch Data In/Data Out ConnectionHow to get Protea NE Software Protea NE SoftwareInput Audio Functions Connecting the ne24.24M to a computer using EthernetAudio Functions 1a Input Mute1c Push To Talk Mic 1c Phantom Power1e Input Delay 1d Input GainOperating Manual ne24.24M Matrix Processor 1g Noise Gate 1h Autoleveler1j Matrix Routing Output Audio Functions1i Ducker 1k Remote Level Control2b Hpf/Lpf Crossover ButterworthLinkwitz-Riley 2c Output DelayBessel 2d Output EQ2f Output Compressor/Limiter Channel Preset and Sub Preset File ManagementOther Software Functions 2g Output MuteRemote Control Copying Settings to Another Input Or OutputProgram Upgrade 10.1 WR-1 Volume Control10.2 WR-2 Contact Closure Preset Recall 10.3 WR-5 Programmable Zone ControllerWR-1 Wiring Diagram Common12.2 RS-232 Data Communications Problems GPO Expansion Module Wiring ExamplesTroubleshooting Tips 12.1 Audio Problems DimensionsSpecifications Warranty InformationTypical Applications Input by 8 Output Boardroom SystemLeft / Center / Right Theater System Ne24.24M Back Panel

WR-2, WR-1, WR-5 specifications

The Ashly WR series, comprising the WR-5, WR-1, and WR-2 models, is a lineup of high-performance wall controllers designed to enhance the user experience in professional audio environments. These devices are particularly useful in applications such as classrooms, conference rooms, and studios, providing intuitive control over various sound systems.

The WR-5 is the flagship model of the series, featuring a compact design that supports multiple zones. One of its standout characteristics is its ability to control various audio source devices, allowing users to select different inputs and adjust volume levels in distinct areas. The WR-5 is equipped with a large, easy-to-read LCD screen, which provides visual feedback on settings and selected configurations. Its Ethernet connectivity allows for seamless integration with compatible systems, making remote management and control straightforward.

The WR-1 is a versatile single-zone controller designed for simplicity. It features a rotary volume knob and a push-button for mute, making it an ideal choice for users who prioritize ease of use. The WR-1 can be integrated into existing setups with minimal effort, and its user-friendly interface ensures that anyone can operate the system without requiring extensive training. The unit supports audio over Ethernet, which allows for flexible placement and installation in various settings.

The WR-2 is designed for dual-zone control, offering similar features to the WR-1, but with the added benefit of managing two distinct audio zones. This model supports individual volume control for each zone, making it perfect for environments where different audio experiences are needed in separate areas. Like its counterparts, the WR-2 employs robust Ethernet connectivity, ensuring that it can communicate effectively with compatible audio systems for a cohesive overall sound experience.

All three models in the Ashly WR series are built with high-quality materials and innovative technology, ensuring durability and reliable performance. They feature intuitive layouts and responsive controls, making them suitable for a broad range of audio applications. Whether it is in a corporate environment or an educational setting, the Ashly WR series provides a sophisticated yet user-friendly solution for managing audio systems effectively.

In conclusion, the WR-5, WR-1, and WR-2 controllers are excellent options for anyone looking to streamline their audio control experience while maintaining high-quality sound management in diverse environments.
Top Page Image Contents