Aviom AV-P2 manual Specifications, Dimensions

Specifications		Dimensions
Audio Outputs	2, impedance balanced line-level
	5.0 mm Euroblock connectors, female, panel-mount
	2 male Euroblock connectors supplied in box
	Screw terminals: Audio +;	Audio -; Ground
Channel Selection	16-position rotary switch
D/A Conversion	48kHz, 24-bit
Output Levels	Variable: +4dBu to -31dBu in 1.5dB increments
	6-position DIP switch, per channel
Indicators	LEDs; red: Power, green: A-Net Active,
	yellow: Stereo Pair
Output Impedance	100 ohms
Signal to Noise	93dB typical, A/D to D/A
(unweighted)	Measured from AN-16/i Input Module to AV-P2
Freq. Response	4Hz–22kHz +0.2dB/-3dB
THD +N	-93dB at -10dBFS
Crosstalk	-85dB at 1kHz
Bit Error Rate (BER)	10-12
Digital Connections	A-Net In: 1; A-Net Out: 1; RJ45 connectors
Pro16™ A-Net®	Uses unshielded Cat-5e UTP (or better) cable
Latency	0.880 msec (measured from analog input to
	analog output)
Power Supply	External, DC, universal switching type
Input Voltage	100–240 volts, 50/60Hz, 30VA
Output Voltage	18–24 VDC, 0.5 amp
Plug Size	2 mm, locking, center pin hot
Dimensions	7.45” (189.2 mm) wide x 7” (177.8 mm) deep; 1U high
Weight	3.4 lbs (1.54 kilo)
All Aviom products are designed and manufactured in the USA.

30 31