Bosch Appliances PLE-1MA060-EU, PLE-1MA030-EU, PLE-1MA120-EU manual Mechanical, Environmental

Page 28

Plena Mixer Amplifier Installation and User Instructions Technical data

en 28

6.1.6Music inputs 3x

Connector

Cinch, stereo converted to mono

Sensitivity

200mV

Impedance

22kohm

S/N (flat at max volume) >70 dB

S/N (flat at min volume/muted) >75 dB

Headroom >25 dB

6.1.7Emergency / telephone 1 x

Connector

7-pin, Euro style pluggable screw connector Sensitivity tel

100 mV – 1 V adjustable Sensitivity 100V

10 V – 100 V adjustable Impedance

>10 kohm

S/N (flat at max volume) >65 dB

VOX

threshold 50 mV; attack time 150 ms; release time 2 s

6.1.8Master/music output 1 x

Connector

3-pin XLR, balanced

Nominal level

1V Impedance <100 ohm

6.1.9Loudspeaker outputs 100 V

Connector

Screw connector, floating

Max / rated PLE-1MA030-EU 45 W / 30 W

Max / rated PLE-1MA060-EU 90 W / 60 W

Max / rated PLE-1MA120-EU 180 W / 120 W

6.1.10 Loudspeaker output 8 ohm*

Connector

Screw terminal, floating

PLE-1MA030-EU

16 V (30 W) PLE-1MA060-EU 22 V (60 W)

PLE-1MA120-EU 31 V (120 W)

6.2Mechanical

Dimensions (H x W x D)

100 x 430 x 270 mm (19" wide, 2U high) Mounting

Stand-alone, 19" rack Color

Charcoal

Weight (PLE-1MA030-EU)

Approx. 5 kg

Weight (PLE-1MA060-EU)

Approx. 8.5 kg

Weight (PLE-1MA120-EU)

Approx. 10.5 kg

6.3Environmental

Operating temperature -10 to +45 ºC Storage temperature -40 to +70 ºC Relative humidity <95%

Acoustic noise level of fan (PLE-1MA120-EU) <33 dB SPL @ 1 m

Bosch Security Systems 2007-11 PLE-1MA030-EU, PLE-1MA060-EU, PLE-1MA120-EU en

Image 28
Contents Plena Mixer Amplifier Important safeguards Table of contents Operation Introduction PurposeDigital document Intended audience Related documentationConversion tables Conversion of units of massContents of box DescriptionPlena product range Plena Mixer AmplifierSchematic overview of the Plena Mixer Amplifier Front panel Controls, connectors and indicatorsPlena PLE-WP2Z3S wall panel Rear panel Rear panel Intentionally left blank Installation Install unit in rack optionalCheck settings/connections Unpack unitIntentionally left blank Connecting inputs Connections and settingsPriority microphone input Secondary microphone input Additional microphones inputs 3Connecting 100 Volt input signal Emergency inputsConnecting emergency telephone lines Connecting music source inputs Music source inputsConnecting outputs Main outputCall only Master outputConnecting speakers Constant voltage loudspeakersUnit settings Rear panel settingsRotary controls Pin settings and labelling Switch on and off Switch onSwitch off OperationMicrophone/line controls Music controlsTone control Output controlsTechnical data ElectricalMechanical EnvironmentalPage For more information visit