Plena Mixer Amplifier Installation and User Instructions Description
en 9
2.4Controls, connectors and indicators
2.4.1Front panel
See figure 2.2 for an overview of the controls and indicators.
1 Power button.
2Label holder for
created by user.
3 Label holder for
4 Master high tone control.
5Master volume control - controls all inputs except emergency and call station.
6Output level meter
7 Input level control:
•microphone/line 1
•microphone/line 2
•microphone/line 3
•microphone/line 4
8Music source selector (for music inputs 1, 2, and 3).
9 Music source volume control.
10 Master low tone control.
11 Air inlet holes.
Note
Do not obstruct the airflow into the unit.
Note
Users can create custom labels for the microphone/line inputs and description of the music sources. These labels can be attached to the mixer amplifier at position numbers 2 and 3 (see figure 2.2). Colored pins can also be inserted at various positions around the dial controls to indicate the favorite settings for a particular application. For more information on inserting and removing pins, see section 4.3.2.
2.4.2Plena PLE-WP2Z3S wall panel
The optional Plena
The music source can be easily changed. The status of each music source is indicated by an LED.
A standard CAT 5 cable is used to connect the wall panel to the
12 Headphone socket.
1 | 2 | 3 | 4 | 5 | 6 |
|
|
|
|
| B |
7 | 8 | 9 | 10 | 11 | 12 |
figure 2.2: Front panel
Bosch Security Systems