Campbell Hausfeld operating instructions Model NB0050, Nailer Components And Specifications

Page 2
! NOTICE
! WARNING

Operating Instructions

Model NB0050

 

 

Warning Continued

Never place your hand or any part of your body in the nail dis- charge area of the nailer. It is possible for the

nailer to eject a fastener and could result in death or serious personal injury.

Never carry the

nailer by the air hose or pull the hose to move the nailer or a compressor. Keep hoses

away from heat, oil and sharp edges. Replace any hose that is dam- aged, weak or worn. Personal injury or tool damage could occur.

Always assume the nailer contains nails. Never use the nailer as a toy. Do not engage in horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of nails. Never point the nailer at anyone. Accidental trigger- ing of the nailer could result in death or serious personal injury.

Do not drive a

nail on top of other nails. The nail could glance and cause death or a serious punc- ture wound.

Do not operate or allow anyone

else to operate

the nailer if any warnings or warning labels are not legible. Warnings or

warning labels are located on the nailer magazine and body.

Never leave the nailer unattended or connected to an air compressor when not in use. Serious personal injury can occur if someone picks up and uses the nailer without knowing the correct way to operate the nailer.

Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, exam- ine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur.

Caution indicates a potentially haz-

ardous situation which, if not avoided, MAY result in minor or moderate injury.

Do not modify or alter the nailer or any nailer parts. Do not use the nailer if any shields or guards are removed or altered. Do not use the nailer as a hammer. Serious personal injury may occur.

Avoid long extended periods of work with the nailer. The nailer can harm the user’s hands or arm. Stop using the nailer if pain occurs.

Always check the work con- tact element (WCE) trip mechanism of the nailer. A nail could acci- dentally be dri- ven if the trig-

gering mechanism is not working properly. Serious personal injury may occur.

Disconnect air supply and release tension from the pusher before attempting to clear jams because fasteners can be ejected from the front of the nailer. Personal injury may occur.

Notice indicates important informa-

tion, that if not followed, may cause damage to equipment.

Avoid using the nailer when there

are no nails in the magazine.

Accelerated wear on the nailer may

occur.

Clean and check all air supply hoses

and fittings before connecting the

nailer to compressor. Replace any

damaged or worn hoses or fittings.

Tool performance or durability may

be reduced.

Air compressors providing air to the

nailer should follow the require-

ments established by the American

National Standards Institute

Standard B19.3-1991; Safety

Standard for Compressors for

Process Industries. Contact your air

compressor manufacturer for infor-

mation.

Nailer Components And Specifications

Adjustable Direction

Exhaust Deflector

Warning Labels

Pin (Single Cycle)

Trigger

Magazine

Nail Pusher

Quick Clear Latch

 

Work Contact

 

Element (WCE)

 

Rubber

Nail Loading Area

 

No-Mar Tip

Release Catch

Nail Discharge Area

REQUIRES: 1.5 SCFM with 10 nails per minute @ 90 PSI

AIR INLET: 1/4” NPT

NAIL SIZE RANGE: 3/4” to 2”

MAGAZINE CAPACITY:

100 Nails per load, 16 gauge

WEIGHT: 4 lbs., 13 oz.

LENGTH: 11-1/2”

HEIGHT: 11-1/2”

MAXIMUM PRESSURE: 110 PSI

PRESSURE RANGE: 70 - 110 PSI

Table Of Contents

General Safety . . . . . . . . . . . . . . . .1

Specifications . . . . . . . . . . . . . . . .2

Using The Nailer . . . . . . . . . . . . . .3

Operational Modes . . . . . . . . . . . .3

Operating The Nailer . . . . . . . . . .4

Troubleshooting . . . . . . . . . . . . . .6

Warranty . . . . . . . . . . . . . . . . . . . .7

2

Image 2
Contents Model NB0050 General Safety InformationDescription Nailer Components And Specifications Model NB0050Recommended Hookup Using The NailerOperational Modes Operating The Nailer Fasteners Troubleshooting Guide Problem Cause SolutionLimited Warranty What is not Covered Under this WarrantyNB0050

NB0050 specifications

Campbell Hausfeld NB0050 is a versatile and efficient air compressor that caters to both novice DIY enthusiasts and seasoned professionals alike. Known for its reliability and compact design, the NB0050 is an ideal addition to any workshop or garage. This air compressor stands out due to its powerful performance and user-friendly features.

One of the main features of the Campbell Hausfeld NB0050 is its 5.0-gallon air tank, which allows for extended operation between refills. This sizeable air tank not only provides consistent airflow but also helps to reduce the frequency of compressor cycling, extending the lifespan of the unit. The compressor is equipped with a powerful 1.0 horsepower motor that delivers up to 125 PSI, ensuring it can handle a wide range of tasks, from inflating tires to powering pneumatic tools like nail guns and impact wrenches.

The NB0050 utilizes an oil-lubricated, cast iron pump, which contributes to its durability and longevity. This type of pump provides superior cooling and reduces friction, making it ideal for heavy use. The compressor is also designed with a low noise level, operating at around 68 dBA, making it a more pleasant option for various environments, especially where noise control is a consideration.

Portability is another key characteristic of the Campbell Hausfeld NB0050. It features a sturdy handle and rubberized wheels that make it easy to transport between job sites or to move around the garage. Despite its robust construction, the design ensures it remains lightweight enough to be handled comfortably.

Moreover, the NB0050 comes with essential safety features, including a thermal overload protection system that prevents overheating during prolonged operation. This added layer of safety ensures that users can operate the compressor without worry, making it suitable for both home and professional environments.

In addition to its impressive capabilities, the Campbell Hausfeld NB0050 is backed by a manufacturer’s warranty, providing peace of mind to buyers. Overall, its combination of power, efficiency, and portability makes the Campbell Hausfeld NB0050 a top choice for anyone in need of a reliable air compressor for a variety of applications. Whether tackling home improvement projects or professional tasks, this model is designed to exceed expectations and deliver exceptional performance.