AMC XOi manual Keypad XK1 and Zone Setup, EQ Control and Source Grouping, Volume Reset, All off

Page 12

6.Keypad XK1 and Zone Setup

The Zone number each keypad XK1 belonging to is decided by which RJ45 connector each keypad connected through Cat-5 cable from JK2 of XK1 to XOi.

EQ Control and Source Grouping

The keypads can be used to set specific zone functions. These are for bass and treble EQ response and source grouping. To change bass response, press the Mute button and Source 2 button simultaneously. Adjust the bass level up or down by using the Volume Up and Volume Down buttons. The Volume indicator LEDs will indicate the output level, Fig. 7. Adjust treble response using the same process. This is accessed by pressing the Mute and Source 3 buttons. Once the desired setting is made, press the Source button again to return the keypad to normal operation.

-8dB -6dB -4dB Flat +4dB +6dB +8dB

Mute

Power

Volume

Source grouping is a feature that allows multiple zones in an open living space to always share the same source selection but still retain individual volume and on/off control. This is achieved by pressing the Mute and Source 4. Volume Up enables the group function, and Volume Down disable the group function and cause the keypad to operate independently of all other groups, Fig 8.

Volume Reset

The XOi system keypads automatically reset the listening volume to a low level when all zones have been turned off and a zone is turned on again.

All off

All the zones in the system can be turned off simultaneously from any keypad by pushing and holding the power button until the keypad goes completely dark. A single push and release the power button will only turn that zone off. If another zone is on, the power button will remain lit.

Group Disabled

Group Enabled

Mute

Power

Fig 8

Volume

11

Image 12
Contents Page Page Application and Feature List Features of the Amctm model XOi * System for total 4 ZonesRear Panel CONNECTIONS/FRONT Panel Controls 12VDCRear Panel Connections Front Panel ControlsPower Source SelectionJK2 RJ45 to XOi Rear Panel JK3 RJ45 To Another XK110. JK4 RJ45 To SUB Zone Remote Control Power On & OffVolume Mute & Mute On & Mute OffInstalling the XOi Digital Home System PrewireSpeaker Wire Termination at XOi Installing the XOi IR OutputsKeypad XK1 and Zone Setup Volume ResetEQ Control and Source Grouping All offRJ-11 Connection Specifications PhysicalSafety Instruction Weltronics Corp