VocoPro KR-3808 PRO Operations, Setting the Radio Station Presets, Using the Auto Feature

Page 22

Operations

Setting the Radio Station Presets

There are 60 programmable radio station presets available on the KR-3808 PRO (30 for AM and 30 for FM).

To set a radio station preset.

1.Use the PRESET CHANNEL + and - (CH+ and CH- on rem ote control) to select a preset number ie CH4.

2.Use the SCAN or TUNE buttons to select the radio station you would like to assign to the preset.

3.Press and hold the SCAN button on the front panel (memory on remote control) to assign the current radio station to CH4.

4.Repeat the previous steps for addition presets.

Using the AUTO Feature

The AUTO feature is designed to conveniently switch between active input channels and eliminate moments of silence between Karaoke performances. When playback is initiated on a player connected to the AV1 or AV2 channels, the KR-3808 automatically selects that channel as the active input channel. When there is no signal detected from the AV1 or AV2 channels, the KR-3808 automatically switches to the DVD channel.

To utilize the DVD channel, simply connect a source player to the DVD jacks and have it set to repeat playback or similar playback mode with a steady stream of music/video output. When playback ends on a player connected to the AV1 or AV2 channels, DVD channel playback will immediately begin eliminating extended periods of silence between performances.

To adjust the level of the DVD audio, use the DVD LEVEL dial on the back panel, located near the DVD input.

To enable the AUTO feature, press and hold the INPUT button down until the AUTO indicator is illuminated.

To disable the AUTO feature, press the INPUT button to return to manual input selection.

Note: The switch to DVD when the signal stops may take a few seconds.

Using the TALK OVER Feature

The talk over function can be useful for making announcements without having to manually adjust the master volume. With the talk over function active, the music volume will be reduced automatically when the microphones are spoken into. For Karaoke, it’s recommended that you leave the talk over function off.

To enable the talk over function, press the TALK button on the front panel or remote control. The TALK light will illuminate in the display window.

To turn off the talk over function, press the TALK button on the front panel or remote control. The TALK light will turn off in the display window.

20

Image 22
Contents KR-3808 PRO Page Table of Contents KR-3808 PROSafety Instructions 220V 110V Info@vocopro.com Curtiss Court La Verne, CATEL FAX Techsupport@vocopro.comListening for a Lifetime Before Getting Started Npacking the KR-3808 PROConnecting the Power Cable About the Remote ControlGetting Connected Preparing the Speaker Cable Connecting SpeakersDetermining the proper way to connect the speaker cables Connecting to the KR-3808 PRO’s Inputs Selecting the Correct input channelSelecting the Correct input channel Getting Connected Connecting to the REC OUT or Line OUT jacks Connecting to a TV using the RCA Video yellow Output Front Panel Descriptions and Functions MIC Effect Front Panel Descriptions and Functions Rear Panel Descriptions and Functions Rear Panel Descriptions and Functions Remote Control Descriptions and Functions Using the Talk Over Feature Setting the Radio Station PresetsUsing the Auto Feature OperationsTroubleshooting