Video Connections

Getting Connected

Coaxial Digital Audio

Use the Coaxial output for connecting digital audio to a device with a coaxial input.

What you will need:

•1 Digital Coaxial cable **

•An audio input device with a Digital Coaxial audio input jack such as a digital receiver or mixer

�	�	��	��
				�
				��
				��
				��
				��
				��
�	��	��	��	��
�	��	��	��	��

��

1. Connect one end of the Coaxial cable to the COAXIAL output jack on the rear panel of the DVX-668K.

2.Connect the other end of the Coaxial cable to a Coaxial input jack on a receiver, mixer, etc.

NOTE: Microphone vocals are not output through the Coaxial Digital Output.

**Although it is alright to use standard RCA cables, it is recommended that you use Digital RCA audio cables for optimum digital signal quality.

��

Connecting Video Using the RCA Video Output

What you will need:

•1 RCA video cable (usually labeled yellow)

•A TV, video monitor or video mixer with an RCA video input

��

1.Connect one end of the RCA video cable to the yellow RCA VIDEO output on the rear panel of the DVX-668K.

2.Connect the other end of the RCA video cable to an RCA video input jack on a TV, monitor or video mixer.

S-Video

What you will need:

•1 S-Video Cable

•A TV, video monitor or video mixer with an S-Video input

1.Connect one end of the S-Video cable to the S-Video output on the rear panel of the DVX-668K.

2.Connect the other end of the S-Video cable to an S-Video input jack on a TV, monitor or video mixer.

NOTE: When using the S-Video output, the DVX-668K must be set to S-VIDEO output. See “Changing the Video Output Mode” in the Operations section of this manual for instructions on setting the DVX-668K to S-VIDEO Mode.

		��
�	��	��
		��
		��
		��
		��
		��
		��
	��	��
��	��	��

��

		��
�	��	��
		�
		��
		��
		��
	��	�
��	��	��