General Operations

Switching Between PAL and NTSC Video Modes

The DVX-668K is defaulted to NTSC. Use the N/P button on the remote control to switch between PAL and NTSC.

1.If there is a disc in the DVX-668K, make sure it is stopped.

2.Press the N/P button on the remote control.

NTSC: North America

PAL: Europe and Asia

Changing the Video Output Mode

The DVX-668K has different video output channels: RGB, YUV, P-SCAN, S-Video. The DVX-668K must be set to the correct video output mode when using these output channels.

To cycle through the different video output modes:

1.If there is a disc in the DVX-668K, make sure it is stopped.

2.Press the V-MODE button on the remote control.

Looping a Section of Disc using the A--B Button (CD, VCD, DVD and USB)

1.Press the A--B button on the remote control to set the starting point of the loop.

2.Press the A--B button again to set the ending point of the loop and to begin the loop.

3.Press the A--B button a third time to cancel the loop and resume normal playback.

Using the Digital Equalizer (EQ)

The DVX-668K has ﬁve preset equalizer settings.

1.Press the SETUP button on the remote control to open the SETUP menu.

2.Select > Audio Setup Page > Equalizer > EQ type.

3.To change the EQ settings, choose one of the following modes: None, Rock, Pop, Live, Dance, Techno, Classic, or Soft.

4.Press the ENTER button to conﬁrm your setting.

Playing One Frame at a Time with the Step Function

The Step function allows you to view one frame at a time on DVDs and VCDs.

NOTE: The Step function does not work on CD+Gs.

1.Press the STEP button to enter Step mode and pause the current frame.

2.Press it again to jump to the next frame.

3.Press PLAY to resume normal playback.