General Operations
Programming a Custom Track Order
The
1.If there is a disc in the
2.Press the PROG button on the remote control to access the Program menu. The Program menu will appear on the TV screen.
3.Enter a track number using the number buttons on the remote control.
4.Continue this until your playlist is complete.
example
To create a playlist in the following order:
1.Track 14
2.Track 7
3.Track 3
4.Track 1
1.Press the PROG button to enter Program mode
2.Press 1 then 4
3.Press 0 then 7
4.Press 0 then 3
5.Press 0 then 1
6.Use the arrow keys to make changes if needed.
7.Use the arrow keys to highlight PLAY and press the ENTER button on the remote control to begin playing in this order.
8.Press STOP to exit the programmed playlist.
Clearing a track in Program Mode
Highlight the last track and press the CLEAR button on the remote control to erase the last programmed track.
Using Digital Key Control
Digital Key Control allows you to change the musical key of disc music to fit any singer’s vocal range. The Digital Key Control buttons are located on the remote control.
- Lowers the musical key
- Resets the musical key back to the original or natural key - Raises the musical key
Setting Repeat Options
Press the REPEAT button on the remote control to cycle through the available Repeat options
•TRACK: Repeats the same song continuously
•ALL: Repeats the entire disc after it has played through
•REPEAT OFF: All Repeat options are off
•CHAPTER (DVD only): Repeats the current chapter on a DVD disc
•TITLE (DVD only): Repeats the current title on a DVD disc
15