Getting Connected

Component (Y,Pb,Pr) Video Outputs

What you will need:

•1 Component (Y, Pb,Pr) cable

•A TV with Component (Y,Pb,Pr) video inputs

1.Connect one end of the Component (Y,Pb,Pr) cable to the Component (Y,Pb,Pr) jacks on the DVX-668K’s rear panel.

2.Connect the other end of the Component (Y,Pb,Pr) cable to the Component (Y,Pb,Pr) inputs on a TV.

NOTE: When using the Component output, the DVX-668K must be set to the correct video output mode. See “Changing the Video Output Mode” in the Operations section of this manual for instructions on setting the DVX- 668K to the correct video output Mode.

SCART (Europe)

What you will need:

•1 SCART cable

•A TV or video monitor with a SCART input

1.Connect one end of the SCART cable to the SCART output on the rear panel of the DVX-668K.

2.Connect the other end of the SCART cable to a SCART input jack on a TV or monitor.

��

� ��

��

�	�	��	��
			��

��