Yamaha DGC1B manual Chapter Setting Up Your Disklavier, Items Supplied with the Disklavier

Chapter 1

Setting Up Your Disklavier

This chapter provides information on the supplied items and how to set up your Disklavier.

English

Items Supplied with the Disklavier

Check that the following items are supplied with your Disklavier:

•1 Remote Control

•2 Batteries for the Remote Control

•1 Disklavier Sample PianoSoft Disk

•1 Disklavier Sample SmartKey Disk

•1 Sample PianoSoft.PlusAudioTM CD Software

•Basic Operation Manual & Advanced Operation Manual

•1 Control Unit Suspension Bracket

Connecting the Control Unit

Make sure that the control cable extending from the piano is firmly connected to the TO CONTROL CABLE FOR PIANO connector on the rear panel of the Control Unit.

Also make sure that the CD control cable extending from the piano is connected to the CD CONTROL connector on the rear panel of the Control Unit.

		L
		R
			I IN
	L		MID
	RO	G
	NT	ALO
CD	CO	/AN
		DIO
		AU

CD control cable

				BLE
			L	CA
		ONT	RO	O
			IAN
TO	C	R	P
	FO

		SELECT
	HOST	2
		PCAC
HOST	C1	M
TO	MP IDI

Chapter 1:

Setting Up

Your

Disklavier

Control cable

Note: The control cable should be connected to the Control Unit when the Disklavier is installed. If, however, it is not, carefully connect the control cable to the Control Unit’s TO CONTROL CABLE FOR PIANO connector on the rear panel. See step (4) in “Mounting the Control Unit to the Grand Piano” at the beginning of this manual.

It is recommended to mount the Control Unit to the underside of the treble side key bed. See “Mounting the Control Unit to the Grand Piano” at the beginning of this manual.

1