Yamaha DGC1B manual PianoSmart Recording, When Recording a New Song, When Re-recording

PianoSmart Recording

During recording, songs can be recorded as MIDI data while a CD is being played back. You can record your song onto Memory Disks or a floppy disk.

When Recording a New Song

1a Specify a disk.

Use the disk in SMF format.

Note: If you are recording to a floppy disk, make sure that the disk’s erasure protection tab is set to “unprotected”.

☛Unformatted disks must be formatted before use with the Disklavier. See “Formatting Disks” on page 17 in the Advanced Operation Manual.

If an E-SEQ type disk is used, the following display appears when you attempt to start recording, and recording is disabled. Use the disk in the SMF format.

1b Use the [SELECT] buttons to select the number of the memory disk that will serve as the recording destination.

A new song number is created for the new recording. For example, if the last song to be recorded was No.6, then the new song will be No.7.

2 Specify the CD that is to be recorded.

When you insert CD into the CD drive, the letter “Cd” automatically appear on the left side of the display.

3	Press [SONG SELECT] to select the
	song on the CD that is to be
	recorded.
4	Press [REC] to engage the Record
	Standby mode.
	The REC indicator lights and the
	PLAY/PAUSE indicator flashes.
	The currently selected CD song is recorded.
5	Press [PLAY/PAUSE] and recording
	will begin.

The PLAY/PAUSE indicator stops flashing. Start playing your song with the CD sound. The following display appears.

“PS” indicates PianoSmart.

6 When you finish playing, press [STOP].

When Re-recording

Re-recording the Same Song on the Same CD

1 Specify the CD that is to be recorded.

When you insert CD into the CD drive, the letter “Cd” automatically appear on the left side of the display.

2a Specify a disk.

Note: If you are recording to a floppy disk, make sure that the disk’s erasure

protection tab is set to “unprotected”.

56