Roland GKP-4 Names of Things and What They Do, GK in Connector, GK OUT Connectors A, B, C, D

Page 5

Names of Things and What They Do

3

1

2

1. GK IN Connector

Use a GK cable to connect a GK-2A here.

2. GK OUT Connectors (A, B, C, D)

4

Use GK cables to connect GK-compatible devices (such as the VGA-7, VG-88, GR-33, WP- 20G, and OC-20G) here.

When using only one GK device, connect it to GK OUT A (POWER SUPPLIER).

3. GK SW Switches

These switches determine whether or not control signals from a GK-2A’s switches (DOWN/ S1, UP/S2) will be transmitted to the corresponding GK device (ON), or not (OFF).

Switch the GK SW to ON only for GK devices that you want to be affected by switch movements on a GK-2A.

4. GK VOL Switches

These switches determine whether GK-2A volume (SYNTH VOL) control signals are transmitted to the corresponding GK device (ON), or not (OFF).

Switch the GK VOL to ON only on the GK devices that you want to be affected by adjustments made using the GK-2A's volume control.

When the signals are not sent to a GK device, the device's volume level is set to maximum.

5

Image 5
Contents Copyright 2001 Roland Corporation Page For EU Countries Important Notes GK OUT Connectors A, B, C, D GK in ConnectorGK SW Switches GK VOL SwitchesVG-88GR-33 Connecting DevicesConnecting Devices VG-88 GR-33 WP-20G OC-20G Guitar Amp Connection ExampleSpecifications Africa Information