Yamaha PSR-270, Portatone Select the Function mode, Select the desired Function parameter number

PLAYING VOICES — THE VOICE MODE

Drum Kit Voice Chart (voices 101 - 110)

When one of the 10 panel Drum Kit voices are selected you can play different drums and percussion instruments on the keyboard. The drums and percussion instruments played by the various keys are marked by symbols above the keys.

STYLE

VOICE 101Std.Kit1

Function Parameters — Main Voice

No.	Name	LCD
101	Standard Kit 1	Std.Kit1
102	Standard Kit 2	Std.Kit2
103	Room Kit	Room Kit
104	Rock Kit	Rock Kit
105	Electronic Kit	Elct.Kit
106	Analog Kit	AnlogKit
107	Dance Kit	DanceKit
108	Jazz Kit	Jazz Kit
109	Brush Kit	BrushKit
110	Symphony Kit	SymphKit

The Function parameters provide additional settings for the Main voice. These settings are especially useful when using a second voice in the Dual or Split modes, since they let you change or enhance the sound of the Main voice separate from the Dual or Split voice. These settings include:

• Volume	• Reverb Send Level
• Octave	• Chorus Send Level
• Pan	• DSP Effect Send Level

1 Select the Function mode.

Press the FUNCTION button.

Flashes to indicate Function parameter can be selected.

STYLE F01M.Volume

FUNCTION

MEASURE 001 116TEMPO

2 Select the desired Function parameter number.

While the “FUNCTION” indication is flashing, use the numeric key- pad to select the desired Main Voice Function parameter number (1 - 6). (See the “Parameters” list below for details.)

Function parameter numbers can be selected in the same way as with the voices (see page 28). You can use the numeric keypad to directly enter the number, use the +/- keys to step up and down through the parameters, or press the FUNCTION button to advance through the parameter numbers.

Since the “FUNCTION” indication flashes for only a couple of seconds, make sure to select the parameter quickly after step 1 above.

30

28