Yamaha PSR-270, Portatone manual Style F36DspType, Set the DSP Send Level for the desired voices

EFFECTS

DSP

The DSP effect section provides many reverb and chorus effects, plus a wealth of other useful and dynamic effects for enhancing and changing the sound of the voices. Included among these miscellaneous effects are reverse gate reverb, phaser, rotary speaker, tremolo, echo, delay, distortion, equalization, and wah. A total of thirty-three DSP types are available.

1 Turn on the DSP effect and set the DSP Type in the Function mode.

Do this in the normal way:

1)Press the FUNCTION button.

2)Select the desired Function parameter number (#35, #36) with the numeric keypad. (For a list of the DSP Types, see page 45.)

STYLE F35Dsp	STYLE F36DspType
FUNCTION	FUNCTION

3)After “FUNCTION” stops flashing, change the value/setting (with the numeric keypad). For on/off settings, use the +/- buttons.

Restoring the Default Value

If you’ve changed the parameter setting, you can instantly restore the default setting by pressing both +/- buttons simultaneously.

2 Set the DSP Send Level for the desired voice(s).

The Main, Dual, and Split voices can each be set to have different amounts of DSP. Use the corresponding DSP Send Level parameters in the Function mode (Main: #06, Dual: #16, Split: #26) to control this. (See pages 31, 35, 37.)

3 Exit the Function mode.

Once you’ve made all desired settings, press one of the other mode but- tons (SONG, STYLE, or VOICE).

The DSP effect can also be turned on and off with a connected footswitch. (See page 91.)

•The DSP effect is applied only to the keyboard-played voices.

•These settings are not saved when you turn off the power. If you wish to save them, save them to a User bank in the One Touch Setting feature (page 72).

•Eighteen additional DSP Types are available when controlling the PortaTone from a MIDI device. (For details, see page 116.)

If the DSP Send Level is set to a value near or at “000,” the DSP effect may not be heard.

42

40