CHANNELS 7 - 8
NOTE: Channels 7 - 8 contain features that differ from the previous channels. Only those features are mentioned below.
35
39
36
38
37
35.RIGHT INPUT:
1/4" input for line level signals. The Right Input is not adjusted by the Gain (26) control. The signal is then routed to the internal power amp. If the
XR 800F+ is in Left/Right mode then the signal will go to the Right Speaker Output (4). In Mon/Main mode the signal is combined with the Left and placed on the Right/L+R Speaker Output. The right signal can also be patched out of the XR 800F+ via the Right Output jack (7) to external components such as effects, power amps, and recording devices. This feature is only found on Channels 7 and 8.
36.LEFT/MONO INPUT:
1/4" input for line level signals. The Left/Mono input supplies signal to both the Left and Right channels (if there is nothing inserted to the right input jack). It is not adjusted by the Gain Control (26). In Left/Right mode the signal will go to the Left Speaker Output (4) and Right Speaker Output if nothing is inserted to the right input jack. In Mon/Main mode the signal is combined with the Right and placed on the Right/L+R Speaker Output. This feature is only found on Channels 7 and 8.
CHANNEL 9
NOTE: Channel 9 contains features that differ from the previous channels. Only those features are mentioned below.
37.TAPE IN:
This stereo RCA phono jack accepts a stereo input (nominally
38.TAPE OUT:
This stereo RCA phono jack provides a signal for the recording inputs of a stereo tape deck.
CAUTION! DO NOT HOOK THE TAPE IN AND TAPE OUT TO THE INPUT AND OUTPUT OF THE SAME DECK AT THE SAME TIME. DOING SO WILL FORM A LOOP CAUSING SEVERE FEEDBACK. USE SEPARATE DECKS FOR RECORDING AND PLAYBACK, OR USE THE INPUTS AND OUTPUTS OF THE SAME DECK AT SEPARATE TIMES.
11