Peavey XR 600F owner manual Power Section

XR® 600F/400 SC AMPLIFIER SPECIFICATIONS

POWER SECTION		Hum and Noise:
(400 SC Module with DDT™ )		-97 dB below 210 watts
Frequency Response:		Damping Factor:
+0, -1 dB, 20 Hz — 20 kHz @ rated power		Greater than 100 @ 1 kHz, 4 ohms
Rated Power:		Input Sensitivity:
•	210 watts RMS into 4 ohms, both channels	1.5 V RMS for 210 watts @ 4 ohms
	driven
•	150 watts RMS into 8 ohms, both channels	Input Impedance:
	driven	2 k ohms
•	Bridge out 420 watts into 8 ohms*
	*8 ohms minimum load for bridge output only	Power Requirements:
		600 watts, 120 V AC, 60 Hz
Total Harmonic Distortion:
Less than .01% @ 1 kHz @ rated power		Dimensions:
		Width:	19.125"
DDT™ Dynamic Range:		Height:	10.875"
Greater than 26 dB		Depth:	11.0"
		Weight:	35.2 lbs.
DDT™ Maximum Distortion:

Below 0.5% THD for 6 dB overload

Below 1% THD for 20 dB overload