Congratulations on your purchase of the all new ExpressTM 112 TransTubeTM Series. This amp represents years of research on vacuum tube emulation, resulting in a totally new Express. The preamp has been redesigned, using
The new T. Dynamics circuitry, also awaiting several patents, creates the long sought for tube power compression phenomenon. This, when combined with the preamp circuitry, yields the closest tube amp simulation to date. The compression effect is increased by turning the T. Dynamics control down, which lowers the power level the amp puts out.
To further enhance the performance of the Express, an added external speaker jack is included. The speaker has been upgraded to a Sheffield, and an effects loop is included to allow for greater flex- ibility.
IIII
HIGH GAIN INPUT (1)
Used for most electric guitars. It is 6 dB louder than Low Gain input.
LOW GAIN INPUT (2)
Provided for instruments that have extremely high outputs, which can result in overdriving (distorting) the High Gain input. If both inputs are used simultaneously, the output levels are the same (both are Low Gain).
VOLUME (3)
Controls the volume level of the Clean channel.
BRIGHT SWITCH (4)
Provides a preset boost (6 dB) to treble frequencies. To activate, depress the switch to its “in” position.
CHANNEL SELECT SWITCH (5)
Allows selection of the Lead or Clean channel. The “in” position of the switch selects the Lead channel and the “out” position selects Clean.
NOTE: Channel selection may also be achieved by the remote footswitch. If remote selection is desired, the channel switch must be in the “in” (Lead) position.
LOW, MID, & HIGH EQ (6)
Passive tone controls that regulate the low, mid, and high frequencies, respectively.
PRE GAIN (7)
Controls the input volume level of the Lead channel.
THRASH SWITCH (8)
Notches the mid range about 20 dB.
3