Philips RAS-18C9, RAC-18C9 Operation Mode Selection, Room Temperature Setting, FAN Speed Setting

MANUAL OPERATION [Cooling ● Dehumidify ● Circulation]

■Please use under below condition when you want to set the function mode, room temperature and fan speed by manually.

DEHUMIDIFYING

COOLING

Room Temperature 16°C above

Outdoor Temperature 22-42°C

1 OPERATION MODE SELECTION

●Every time you press the button, the mode will change as the below sequence

(Auto) [ (Cool) [ (Dehumidify) [ (Circulation)

2 ROOM TEMPERATURE SETTING

■ Recommend Temperature

°C

▲ ▲

Up

Down

Dehumidify 16~26°C

Cooling 25~28°C

●The cooling operation does not start if the

temperature setting is higher than the current room temperature.

3 FAN SPEED SETTING

●Every time you press the button, fan speed will change as the below sequence.

● COOLING	}	: AUTO [ HIGH [ MED [ LOW
CIRCULATION		: ( [ [	[	)

NOTE

(Auto) : The FAN SPEED is HIGH at first and varies to MED or LOW automatically when the preset temperature has been reached.

● DEHUMIDIFYING	:	LOW (FIXED)
	:	(	)

Dehumidify Function

When the room temperature is higher than the temperature setting: The device will dehumidify the room, reducing the room temperature to the preset level.

When the room temperature is lower than the temperature setting: Dehumidifying will be performed with the room temperature set slightly lower than the current room temperature, whatever the temperature setting. The function will stop (the indoor unit will stop emitting air) as soon as the room temperature becomes lower than the setting.

4 Press the

(START/STOP) button

●Operation start with a signal received sound “beep”.

STOP Press the

(START/STOP) button

●As the settings are stored in memory in the remote control unit, you

only have to press the

(Start/Stop) button next time.

– 10 –