AUTOMATIC OPERATION
■The device will automatically determine the operation mode either COOL or DEHUMIDIFY, depending on the initial room temperature.
1 Press the (START/STOP) button
● Operation start with a “beep”.
STOP Press the (START/STOP) button
● Please make sure you have been selected the (Automatic) mode
by use the (FUNCTION) Button.
● The fan speed selector does not work at this operation.
ENGLISH
■You can slightly adjust the room temperature.
1 Press the °C (ROOM TEMPERATURE) button
● Temperature setting change by 1°C for each 1 time press.
°C
▲ ▲
Up
Down
● You can raise or lower the temperature setting by a maximum of 3°C.
● The display does not indicate the preset temperature in the Automatic mode. Device will receive the setting by a “beep”.
■CONDITION OF AUTOMATIC OPERATION
●The selected mode of operation will not change during the operation even though the room temperature change.
INITIAL ROOM |
|
| FUNCTION | TEMPERATURE | FAN SPEED | |
TEMPERATURE (APPROX.) |
| SETTING | ||||
|
|
| ||||
|
|
|
|
|
| |
|
|
|
|
| HIGH at start, MEDIUM or | |
| - |
|
| |||
Over 27°C | COOL | 27°C | LOW after the preset | |||
|
|
|
|
| temperature is reached | |
|
|
|
|
| ||
|
|
|
| Slightly lower than the |
| |
16 ~ 27°C | - | DEHUMIDIFY | LOW | |||
room temperature | ||||||
|
|
| ||||
|
|
|
|
| ||
|
|
|
|
|
|
– 7 –