17

Temperature Guide

In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difficult to remove.

Auto Temp Control

ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned ON when a cycle is
selected. See Preset Cycle Settings table in “Cycles.”
■ATC works for the wash temperature with Warm and Cold
settings.
■The Cold rinse temperatures depend on the cold water at
your faucet.

SPIN SPEED

Each cycle has a preset SPIN SPEED. To change the spin speed,
select the SPIN SPEED button until the desired setting is
illuminated.

End of Cycle Signal

This signal is helpful when you are removing items from the
washer as soon as it stops. Select ON or OFF.
LaundryGuide
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
Wash Water Temperature Suggested Fabrics
SUPER HOT Sturdy colorfast fabrics
Heavy soils
HOT Whites and pastels
Heavy soils
WARM Bright colors
Moderate to light soils
COLD Colors that bleed or fade
Light soils
CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS
Delay
Wash Extra
Rinse Pre
Wash End of
Cycle Signal
Sanitary Heavily soiled underwear, towels, work cloths, diapers, etc. ✔✔ ✔
Whitest Whites Soiled white fabrics ✔✔✔ ✔
Heavy Duty Heavily soiled underwear, towels, shirts, etc., made of cotton ✔✔✔ ✔
Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of
polyester, nylon, cotton, linen, or cotton blends
✔✔✔ ✔
Quick Wash Small loads of 2-3 lightly soiled cotton, polyester, nylon, and
cotton blends
✔✔ ✔
Delicate/
Hand Wash Curtains and delicate clothing, dresses, skirts, shirts and
blouses, fabrics made of silk, and special care items marked
“Hand Washable”
✔✔
Clean Washer No clothes ✔✔
Rinse & Spin All loads ✔✔ ✔
Drain & Spin All loads ✔✔
Soak All loads ✔