Level theWasher

One foot has been installed at a different height on your new washer. The other three feet were preset at the factory. Properly leveling your washer will minimize excessive noise and vibration.

1.Push on the upper front panel to be sure that the washer is on the rear feet. Lower the right front foot until it contacts the floor. Check the levelness of the washer by placing a level on the top edge of the washer, first side to side, then front to back.

If the washer is against a wall, move the washer out slightly before tipping back. First prop the front with a wood block and adjust the feet as necessary; then prop the back and adjust feet as necessary. Repeat this step until washer is level.

2.Make sure that all four feet are stable and resting on the floor. Then check that the appliance is perfectly level (use a level).

3.After the washer is level, use a 14 mm open-end wrench to turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are not tight against the washer cabinet, the washer may vibrate.

4.When you are pushing on the edges of the washing machine top plate, the machine should not move front to back, side to side, or diagonally.

5.Slide the washer to its final location.

6.Confirm the levelness of the washer.

CompleteInstallation

1.Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. See “Electrical Requirements.”

2.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3.Check that you have all of your tools.

4.Dispose of/recycle all packaging materials.

5.Check that the water faucets are on.

6.Check for leaks around faucets and inlet hoses.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

7.Plug into a grounded 3 prong outlet.

8.Read “Washer Use.”

9.To test and to clean your washer, use ¹⁄₂ the manufacturer’s recommended amount for a medium-sized load. Pour the detergent into the detergent dispenser. Select NORMAL/ CASUAL, and then select START. Allow the washer to complete one whole cycle.

Use only HE High Efficiency detergent.

10

Page 9 Page 11
Page 10
Image 10
Whirlpool W10133484A manual Level theWasher, CompleteInstallation
Page 9 Page 11

W10133484A specifications

The Whirlpool W10133484A is an innovative appliance designed to elevate the functionality and efficiency of kitchen spaces. This high-quality kitchen accessory is primarily known for its versatility in enhancing meal preparation and ensuring a seamless cooking experience.

One of the standout features of the W10133484A is its robust design, built to endure the demands of a busy kitchen. Its stainless steel construction not only offers durability but also adds a modern touch to any kitchen décor. The aesthetic appeal is complemented by its user-friendly interface, making it easy for users to operate without needing extensive technical knowledge.

Equipped with advanced technology, the W10133484A boasts a variety of performance enhancements. One such feature is its energy efficiency, which helps users save on utility bills while reducing their environmental impact. This appliance is designed to use minimal resources, allowing for sustainable operation without sacrificing performance.

The W10133484A also integrates various cooking modes and settings, catering to the diverse needs of home chefs. Whether you are baking, broiling, or simply warming food, this appliance adapts to different cooking styles, ensuring optimal results. The intuitive control panel allows users to easily select settings for precise cooking, while the timer function provides added convenience, allowing you to multitask without worry.

In terms of capacity, the W10133484A is designed to accommodate a range of food items, making it suitable for both small family meals and larger gatherings. The spacious interior enables users to cook multiple dishes simultaneously, saving time and effort in the kitchen.

Safety features are also paramount in the design of the W10133484A. This appliance includes automatic shut-off mechanisms and cool-touch exteriors, ensuring that it is safe to use even in a bustling kitchen environment.

Overall, the Whirlpool W10133484A stands out as a reliable kitchen companion that combines style, efficiency, and user-friendly technology. Its thoughtful design and features make it an essential addition for anyone who values quality and practicality in kitchen appliances. Whether you are a seasoned chef or a cooking novice, the W10133484A will undoubtedly enhance your culinary experience and simplify your cooking processes.
Top Page Image Contents