4
INSTALLATION REQUIREMENTS

Tool s and Pa rts

Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

■Pliers (that open to 1⁹⁄₁₆" [39.5mm])
■Flashlight (optional)

Tools needed for installation

■Open end wrenches 14 mm and 13 mm
■Level
■Wood block
■Ruler or measuring tape
Parts supplied

Alternate Parts

Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number on the cover or in the “Assistance or Service” section.

Options

Pedestal

You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (25.4 cm) or a
15.5" (39.4 cm) pedestal. The pedestal will add to the total height
of the washer.
Optional pedestal

Stack Kit

Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your washer
or refer to the “Assistance or Service” section of this manual. Ask
for Part Number 8572546.
A.U-shaped hose form
B.Water inlet hoses (2)
C.Inlet hose washers (4)
D.Transit bolt hole
plug (4)
E.Beaded tie strap
If You Hav e You W ill Need to B uy
Laundry tub or
standpipe taller
than 96" (2.4m)
Sump pump system (if not already
available)
Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm)
tall drain tub or utility sink and sump
pump (available from local plumbing
suppliers)
Floor drain Siphon break, PartNumber 285834;
additional drain hose
PartNumber 8318155; and connector
kit, PartNumber 2858835
Drain hose too
short 4 ft (1.2 m) drain hose extension kit,
PartNumber 2858863
Water fa ucets
beyond reach of
fill hoses
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314
10ft (3.0 m) Part Number 350008
ABC
D
E

Pedestal

Height Approximate
Height with
Washer
Color Model
Number
10" (25.4cm) 46" (116.8 cm) White WHP1000SQ
15.5" (39.4cm) 51.5" (130.8cm) White WHP1500SQ