Cleaning the dispenser drawer

The dispenser drawer is removable for easy cleaning.

1.Unlock the dispenser drawer by pressing the Release Lever. See “Using the Dispenser.” Remove the drawer.

2.Remove the inserts (the siphon from the softener and bleach compartments).

3.Wash the parts under running water.

NOTE: Do not wash components in the dishwasher.

4.Replace the inserts and return the dispenser to the drawer.

WaterInletHoses

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, record the date of replacement.

Vacation,Storage,andMovingCare

Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather, winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:

■Unplug washer or disconnect power.

■Turn off the water supply to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away.

■Slightly open door to provide ventilation.

To winterize washer:

1.Put 1 qt (1 L) of R.V.-type antifreeze in the drum.

2.Run washer on a Drain/Spin cycle.

3.Unplug washer or disconnect power.

4.Shut off both water faucets.

5.Disconnect water inlet hoses from faucets and drain.

To use washer again:

1.Flush water pipes.

2.Reconnect water inlet hoses to faucets.

3.Turn on both water faucets.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug in washer or reconnect power.

5.Run the washer through the Normal/Casual cycle. Use only HE High Efficencey detergent. Use the manufacturer's recommended amount for a medium-sized load.

To transport the washer:

1.If washer will be moved during freezing weather, put in 1 qt (1 L) of R.V.-type antifreeze in the drum. Run washer on a Drain/Spin cycle.

2.Unplug the power cord.

3.Disconnect the drain hose from the drain system and attach to rear panel clips.

4.Shut off both water faucets.

5.Disconnect the water inlet hoses from faucets, then drain the hoses and clip them to the rear panel of the washer.

6.IMPORTANT: Call service. Do not reuse transport bolts. Washer must be transported in the upright position. To avoid suspension and structural damage, your machine must be properly set up for relocation by a certified technician.

Reinstalling the washer

1.Follow the “Installation Instructions” to locate, level and connect the washer.

2.Run the washer through the Normal/Casual cycle to clean the washer and remove the antifreeze, if used. Use only HE High Efficiency detergent. Use ¹⁄₂ the manufacturer’s recommended amount for a medium-sized load.

21

Page 20 Page 22
Page 21
Image 21
Whirlpool W10133484A manual WaterInletHoses, Vacation,Storage,andMovingCare
Page 20 Page 22

W10133484A specifications

The Whirlpool W10133484A is an innovative appliance designed to elevate the functionality and efficiency of kitchen spaces. This high-quality kitchen accessory is primarily known for its versatility in enhancing meal preparation and ensuring a seamless cooking experience.

One of the standout features of the W10133484A is its robust design, built to endure the demands of a busy kitchen. Its stainless steel construction not only offers durability but also adds a modern touch to any kitchen décor. The aesthetic appeal is complemented by its user-friendly interface, making it easy for users to operate without needing extensive technical knowledge.

Equipped with advanced technology, the W10133484A boasts a variety of performance enhancements. One such feature is its energy efficiency, which helps users save on utility bills while reducing their environmental impact. This appliance is designed to use minimal resources, allowing for sustainable operation without sacrificing performance.

The W10133484A also integrates various cooking modes and settings, catering to the diverse needs of home chefs. Whether you are baking, broiling, or simply warming food, this appliance adapts to different cooking styles, ensuring optimal results. The intuitive control panel allows users to easily select settings for precise cooking, while the timer function provides added convenience, allowing you to multitask without worry.

In terms of capacity, the W10133484A is designed to accommodate a range of food items, making it suitable for both small family meals and larger gatherings. The spacious interior enables users to cook multiple dishes simultaneously, saving time and effort in the kitchen.

Safety features are also paramount in the design of the W10133484A. This appliance includes automatic shut-off mechanisms and cool-touch exteriors, ensuring that it is safe to use even in a bustling kitchen environment.

Overall, the Whirlpool W10133484A stands out as a reliable kitchen companion that combines style, efficiency, and user-friendly technology. Its thoughtful design and features make it an essential addition for anyone who values quality and practicality in kitchen appliances. Whether you are a seasoned chef or a cooking novice, the W10133484A will undoubtedly enhance your culinary experience and simplify your cooking processes.
Top Page Image Contents