TIMER RESERVATION
■ON Timer and OFF Timer are available.
OFF Timer Reservation |
|
| |
1 | OFF TIME setting | ■ Operation stop at setting time | |
| |||
● | Select the OFF TIME by pressing the | (OFF) | |
| Button. |
|
|
● | Setting time will change according | to the below | |
| sequence when you press the button. |
| |
| 0.5 hour interval | 1 hour interval | |
0 . 5 1 . 0 1 . 5 | 9 . 5 10 | 11 12 | |
ENGLISH
●The value change quicker if you keep pressing the button.
2 Press the 
(Reserve) button
●OFF TIMER reserved with a signal received sound “beep”.
●The o (OFF) Mark starts lighting instead of blinking.
ON Timer Reservation
1
ON TIME setting
●Select the ON TIMER by pressing the 
(ON) Button.
●At the beginning of setting, time 6 hours was set.
●Setting time will change according to the below sequence.
0.5 hour interval | 1 hour interval |
0 . 5 1 . 0 1 . 5 | 9 . 5 10 11 12 |
●The value change quicker if you keep pressing the button.
2 Press the 
(Reserve) button
●ON TIMER reserved with a signal received sound “beep”.
●The 
(ON) Mark starts lighting instead of blinking.
CANCELLATION of Timer Reservation
1 Press the 
(Cancel) button
●As the time settings are stored in remote controller
memory, you only have to press the 
(Reserve) button in order to use the same setting next time.
■Operation will start for setting temperature at setting time (The starting time may different depend on the room temperature and set temperature).
– 11 –