RESET ALL SCENES Continued:
3.Disconnect the power and release the buttons.
4.Reconnect the power, all scenes should be erased
COPY BANK OF SCENES:
This function will copy the settings of one bank to another.
1.Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to activate program mode. The LCD DISPLAY (FIG.3) will indicate program mode by displaying a continuous fast blinking dot next
to ‘PROG.’
2.Select the BANK (FIG.4) you want to copy
3.Press and release the MIDI/REC BUTTON (FIG.7)
4.Select the BANK (FIG.4) you wish to record to.
5.Press MUSIC/BANK COPY BUTTON (FIG.9), The LCD DISPLAY (FIG.3) will flash briefly to indicate the function has been completed.
DELETE BANK OF SCENES:
1.Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to activate program mode. The LCD DISPLAY (FIG.3) will indicate program mode by displaying a continuous fast blinking dot next to ‘PROG.’
2.Select the BANK (FIG.4) you want to delete
3.Press and hold the AUTO/DEL BUTTON (FIG.8).
4.While holding down the AUTO/DEL BUTTON (FIG.8) press and hold the MUSIC/BANK COPY BUTTON (FIG.9) at the same time.
5.Release both buttons at the same time, the LCD DISPLAY (FIG.3) should flash momentarily to indicated the function completion.
DELETE SCENE :
This function will reset all DMX Channels in a single SCENE back to 0.
1.While pressing and holding AUTO/DEL(FIG.8), Press and release the SCENE BUTTON (FIG.2)
PROGRAMMING CHASES:
NOTE: YOU MUST PROGRAM SCENES BEFORE YOU CAN PROGRAM CHASES.
1.Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to activate program mode. The LCD DISPLAY (FIG.3) will indicate program mode by displaying a continuous fast blinking dot next to ‘PROG.’
2.Select any CHASE 1 TO 6 (FIG 5) to program.
3.Select a desired SCENE (FIG2) from any bank that has been previously recorded.
4.Press the MIDI/REC BUTTON (FIG.7). All LED’s blink 3 times
5.Repeat steps 3 & 4 as many times as you want. You may store up to 240 steps into one chase.
6.To exit programming press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
You May now playback the Chase Recorded Pg. 14
EDITING CHASES
INSERT A STEP:
1.Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to activate program mode. The LCD DISPLAY (FIG.3) will indicate program mode by displaying a continuous flashing light next to ‘PROG.’
2.Select the CHASE 1 TO 6 (FIG 5) you wish to add a step to.
3.Press and release the TAP SYNC/DISPLAY BUTTON (FIG.11). The Display will now change to the step you are now in.
4.After selecting the TAP SYNC/DISPLAY (FIG.11) use the UP and DOWN BUTTONS, to manually scroll to the STEP you wish to insert a step after.
5.Press MIDI/REC (FIG.7) the LCD will read one step number higher
6.Press the Scene Button you want to insert
6.Press MIDI/REC (FIG.7) again to insert new step.
7.Press and release the TAP SYNC/DISPLAY (FIG.11) to return the dis play to normal operation.
Elation Professional® - DMX OPERATOR User Manual page 11 | Elation Professional® - DMX OPERATOR User Manual page 12 |