Fostex FD-4 Cue & Review Function, Cue & Review function using the Rewind and F FWD buttons

Page 62

Cue & Review Function

Cue & Review Function

This chapter explains how to use the “Cue & Review func- tion” with the REWIND button, the F FWD button, and the JOG/SHUTTLE feature. Using this function enables you to fast forward or rewind at different speeds while the recorder section is playing or stopped.

During the Cue & Review operation, you will hear the sound recorded on the disk, which makes it easy for you to locate the desired point.

Cue & Review function using the REWIND and F FWD buttons

You may cue & review the audio data at three-times speed while the recorder is playing.

1.Press the PLAY button to play the audio data.

2.Press the F FWD button during playback.

[FWD>] appears on the display, and the FD-4 cues in the forward direction at three-times speed.

ABS

MSF

Cue & Review function using the SHUTTLE feature

You may cue and review data at a speed from normal to 64- times speed, using the SHUTTLE feature while the recorder is playing.

EQ

EQ

 

 

 

2

 

3

1

 

 

 

 

PGM

 

 

 

 

 

 

 

SYNC OUT

 

DRIVE

CLK

 

 

 

SCSI

 

 

 

 

 

 

 

AUTO

 

A.PUNCH

 

 

 

 

 

 

 

3.Press the PLAY button again to restore the original play back speed.

4.Press the REWIND button instead of the F FWD button.

[<RWD] appears on the display, and the FD-4 cues in the reverse direction at three-times speed.

ABS

M

S

F

 

 

PGM

 

SYNC OUT

DRIVE

 

CLK

SCSI

 

AUTO

A.PUNCH

5. Press the PLAY button to restore the original playback speed.

Digital scrubbing using the JOG dial

You may perform digital scrubbing while the recorder sec- tion is stopped.

1.Turn the JOG dial clockwise or counter-clockwise while the recorder section is stopped.

You can perform digital scrubbing in the forward or reverse direction.

[FWD>] or [<REW] appears on the display.

When you release the JOG dial, [STILL] appears, and the transport section stops.

2.Press the STOP button to cancel digital scrubbing.

1.Press the PLAY button to start playback.

2.Hold down the SHIFT key and turn the JOG dial clockwise or counter-clockwise.

Turning the JOG dial clockwise will change the cueing speed. Turning the JOG dial counter-clockwise will change the reviewing speed.

The FD-4 displays the selected cue or review speed, which you can select from normal, two-times, four-times, eight- times, 16-times, 32-times, and 64-times speed.

As long as you are holding down the SHIFT key, playback continues at the selected speed.

ABS

 

 

ABS

 

 

M

S

F

M

S

F

 

 

PGM

 

 

PGM

 

SYNC OUT

DRIVE

 

SYNC OUT

DRIVE

 

CLK

SCSI

 

CLK

SCSI

 

AUTO

A.PUNCH

 

AUTO

A.PUNCH

<Display of 16-times review>

<Display of 32-times cue>

3.Release the SHIFT key to cancel the cue and review operation.

The recorder resumes playback at the original speed.

<Note>

The cue and review operation does not affect pitch. Because the FD-4 performs this function by skipping part of data during play- back.

<Note>

When the beginning of the disk is reached during the review opera- tion, the FD-4 starts normal playback, even if you are still holding down the SHIFT key. When the end of the disk (ABS time: 23H 59M 59S) is reached during the cue operation, the FD-4 stops and the PLAY button LED flashes.

62

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Model Safety Instructions Introduction Main features Recording PreparationMixer section Recorder sectionAbout damages Connecting a Scsi driveRecording Preparation About copyrightsInsert a disk into the Scsi drive Recording modeFormatting a new disk Press the EXECUTE/YES keyRemoving a disk from the Scsi drive Turn the JOG dial to select a recording modeWhen you format a disk, a Program is named temporary title Press the Stop button or the EXIT/NO keyFormatting the disk again Press the Setup keyUse the JOG dial to select a recording mode Press the EXECUTE/YES key againControl panel Names and FunctionsRear panel Front panelPanpot knobs PAN L/R Input select switches Input SEL INPUT/OFF/TRKInput faders Monitor panpot knobs PAN MON L/MON REqualizer control knobs EQ HIGH/MID/LOW Input level switches Level H/M/LMonitor level control knob MON INPUT/TRK AUX send knobs AUX AUX 1/AUXContrast adjustment knob LCDDisplay indication select key Setup key SetupAccess LED Access Time Base select keyRecord button RECORD/ Auto Punch Play button PlayStop button Stop Shift key ShiftLocate key LOCATE/ LOC MEM Auto Return/Auto Play mode on/off keyVari Pitch key Vari PITCH/ P.EDIT Hold/ key HoldEdit key Edit Store key StoreUndo/Redo key UNDO/REDO Auto Return Start keyAuto Punch Out key Auto Return End key Auto RTN END/ PreviewAuto Punch In key Auto Punch IN/ Preview Clipboard In key Clipboard IN/ PreviewStereo Out jacks ST. OUT L, R Connector RCA pin Input jacks 1, 2, 3, 4 Connector phoneMonitor Out jacks MON OUT L, R Connector RCA pin Headphone jack Phones Connector stereo TRS phoneMidi in jack Midi in Connector DIN 5-pin Balanced input connectors 3, 4 Input 3Midi OUT jack Midi OUT Connector DIN 5-pin AUX Send jacks 1, 2 AUX Send 1Power cable Data output jack Data OUT Connector OpticalData input jack Data in Connector Optical Power switch PowerTime Base is MTC Time Base is ABSTime Base is BAR/BEAT/CLK Time Base is BAR/BEAT/CLK Time Base is MTCTime Base is ABS Disk recordable remaining Time is displayedVoid Out message Void Data messageAction to take Track unselected messageBefore Starting Time BaseArea actually used on the disk Remain indicatorRecording method Playback monitoring Real track and Additional trackInput monitoring REC SEL switch PAN knobs and stereo busConnecting the guitar and the monitoring head- phones FD-4 initial settingsSetting the disk Initial settingsMonitoring the recording signal Setting the switch and knobAdjusting the recording level Starting recordingUndo/Redo recording Recording onto the additional trackPlayback of the additional track sound Checking the recording soundPlaying track Undo/redo subsequent to exchangeRecording a drum machine to track Connecting a sound sourceBasic Multitrack Recording Overdubbing the bass to trackListening to the overdubbed sound Undo/redo overdubbingMixdown Settings for overdubbing the electric guitar to trackSettings for overdubbing the vocal to track AUX SEND2 and AUX RTN2 of the FD-4 respectivelySettings for the effect units Setting the switch and knob on the FD-4Setting the output level and the master recorder MixdownTo enter a title Handling ProgramsCreating a new Program Using the Program Change function Press the Setup key while the FD-4 is stopped Deleting a ProgramEditing a Program title After you enter the title, press the EXECUTE/YES keyAfter you set the pitch data, press the EXIT/NO key Playback in Vari Pitch ModeSet the desired pitch data using the JOG dial Creating a Tempo Map Connecting a sound source and a effect unitRecording to a Metronome Sound Turning the Metronome function onChecking the recorded sound Checking the metronome soundQuitting recording Press the Stop button to stop the recorderAuto Punch In/Out What is Punch In/Out recording?Punch In/Out Recording Storing the edit pointsPreparation Connecting the instrumentSetting the mixer section Tips for rehearsalHint Quick and easy operation for repeated rehearsal Control panel settings are the same as those for rehearsalAuto Punch In/Out Take Press the Record Track select key 3/L to set track 3 toConnecting the instrument and a foot switch Manual Punch In/OutManual Punch In/Out take Cancelling Rehearsal modeRehearsing Punch In/Out recording HintUndo/Redo Manual Punch In/Out recording Ping-Pong Recording Connecting effect unitsAdjusting the recording level/rehearsal Quitting ping-pong recording Undo/Redo ping-pong recordingPerforming ping-pong recording Checking the ping-pong recording resultsConnect effect units to Aux sends/returns Set the channel 1-4 Input SEL switches to TRKChecking the result of ping-pong recording Digital Recording Setting a recording trackConnecting an external digital device Selecting a Program to recordSetting a digital output track You cannot assign the same track to L and RDigital mixdown Assigning output tracksHow to use the Recorder in jack Edit functions Editing TracksCopy & Paste and Move & Paste Copy & PasteExecuting Copy or Move Checking and adjusting the edit pointsChecking the clipboard data Executing PastePress the Stop button or the EXIT/NO key EraseUndo/Redo Paste Erasing a specified part of the data between ABS 0Executing Erase Undo/Redo Erase Point is passed in the Play or Record modeTrack Exchange Swapping data between Real tracks mono track dataSelecting Additional tracks L-R and Real tracks Executing Track ExchangeSwapping mono track data Select the tracks to swap dataCue & Review Function Cue & Review function using the Rewind and F FWD buttonsDigital scrubbing using the JOG dial Press the Store key Storing a Locate Point Edit PointStoring in real-time Press the desired memory keyPress the HOLD/ key while the FD-4 is stopped Editing and storing locate dataEditing and storing data Press the memory key that you pressed in againEditing the data stored in the Locate key Auto Play Locate FunctionDirect Locate Executing the Auto Play functionPress the Locate key Auto ReturnExecuting the Auto Return function Store the Auto RTN Start and Auto RTN END pointsAuto Repeat operation Auto RepeatExecuting the Auto Repeat function Start playback a little before the Auto RTN Start pointPreviewing the fall of the sound fade out Preview FunctionPreviewing the rise of the sound fade CLK BAR Trim the position at the selected unit digitTime Base Midi Synchronization Midi clock sync systemMTC sync/Machine Control system Connecting an external deviceRefer to page 86 for more information on Setup mode See page 92 for more informationSetting the device ID number Setting MTC OffsetSetting a frame rate Checking synchronization and Machine ControlSetting the FD-4 Sync system in Slave modeSetting up the external device Checking the chase and lock operationRecording Outline of the save/load operation Connecting a DAT machineSaving and Loading Song Data Saving from FD-4 to DAT Loading from DAT to FD-4Preparing a DAT machine Remember thisSaving song data Operation on the FD-4Use the JOG dial to select the desired Program Select the tracks to save using the JOG dialUse the JOG dial to display Save PGM ? Loading song data Press the Setup key when the FD-4 is stoppedSelect tracks to load using the JOG dial You can monitor the data using the following methods Start playing the DAT machineExecution menu Selecting Setup modeChanging the initial settings menus Modifying or deleting stored time signatures Setting a time signatureStoring a time signature Select a Program for which to set a time signatureChecking the stored tempo setting Setting a tempoClearing all time signature and tempo settings Storing a tempo valueModifying or deleting stored tempo settings Repeat steps 3-5 to store necessary tempo dataSetting the Metronome function Setting the Metronome functionSetting a preroll value Setting a preroll timeTurn the JOG dial to select the desired Midi sync signal Setting Midi sync output signalSetting Midi sync signal Initial setting CLK clock & Song Position PointerSetting an MTC frame rate Setting an MTC frame rateSetting an MTC offset value Setting an MTC offsetSetting MTC Offset mode Setting Offset modeSetting the Slave mode Use the JOG dial to select the desired Offset modeSetting the Slave type external sync signal Setting the Slave typeTurning Slave mode on and off Use the JOG dial to turn Slave mode on and offUse the JOG dial to enable or disable recording Setting the Record Protect functionRecording enabled/disabled Setting digital input tracks Setting digital input tracksSetting digital output tracks Setting digital output tracksSetting BAR/BEAT resolution mode Setting BAR/BEAT resolution modeUse the JOG dial to turn the mode on or off Setting the Midi device numberSetting the Midi device ID Use the JOG dial to set the desired Midi device ID numberMidi Implementation Chart Date Version FunctionMMC Command List Refer to MMC Response/Information Field ListCleaning the exterior MaintenanceSpecifications Block Diagram Declaration of EC Directive Index Fostex Corporation

FD-4 specifications

The Fostex FD-4 is a cutting-edge digital multi-track recorder that combines innovative technology with user-friendly features, making it a preferred choice for musicians, audio engineers, and content creators. This portable device brings studio-quality recording capabilities in a compact format, ensuring versatility and ease of use.

One of the standout features of the FD-4 is its ability to record up to eight tracks simultaneously, allowing for complex layering and arrangements. The device supports a variety of audio formats including WAV and MP3, making it suitable for both high-fidelity recordings and efficient file storage. The high-resolution 24-bit/96kHz recording capabilities ensure that the depth and clarity of sound are preserved, regardless of the genre or style being recorded.

The FD-4 is equipped with a user-friendly interface, featuring a large, bright LCD display that provides an overview of tracks, levels, and settings. The intuitive navigation simplifies the process of creating, editing, and mixing audio. Users can easily maneuver through menus, making adjustments on-the-fly without disrupting the creative flow.

Additionally, the FD-4 utilizes advanced digital signal processing (DSP) to enhance audio quality. Built-in effects such as reverb, compression, and EQ provide users with an array of tools to shape their sound before mixing. The flexibility offered by these effects, coupled with the device's capability to handle external effects processors, further expands its creative possibilities.

The FD-4 also features an extensive connectivity range, including multiple microphone inputs that support both XLR and TRS jacks, allowing for versatile recording configurations. This lets users connect various types of microphones and instruments seamlessly. With USB connectivity, users can easily transfer their recorded tracks to a computer for further editing and mixing in digital audio workstations (DAWs).

Moreover, the FD-4 is designed for portability, making it ideal for on-the-go musicians and producers. Its robust construction ensures durability, while the lightweight design allows it to fit easily into a travel bag.

In conclusion, the Fostex FD-4 stands out as a powerful digital multi-track recorder packed with features that cater to both professional and aspiring audio creators. Its combination of high-quality recording, user-friendly interface, and extensive connectivity options positions it as an essential tool for anyone looking to capture high-quality audio in any setting. Whether in a studio or out in the field, the FD-4 delivers the reliability and sound fidelity that users demand.
Top Page Image Contents