Boss Audio Systems GT-6B owner manual Making the Assign On/Off Setting, Press Pedal Assign

Chapter 5 Setting the Pedal Functions (Pedal Assign)

Controlling Effects with the GT-6B Pedals, External Pedals, and External MIDI Devices

Make these settings when controlling effects with the GT- 6B’s expression pedal, expression pedal switch, or CTL pedal, or with external pedals or external MIDI devices connected to the GT-6B.

You can make up to eight separate settings per patch (using Assign numbers 1–8) determining what parameters are controlled by which controllers.

	3
	2
	1
1.	Press [PEDAL ASSIGN].

2.Press PARAMETER [ ] [ ] to display the following screen.

Assign On/Off

Quick Setting

Target

Target value range: Min

Target value range: Max

Sourece

Source Mode

Active Range Low

Active Range High

3.Rotate the VALUE dial to change the setting value.

4.Repeat Steps 2 and 3 as needed until the settings are completed.

5.To save the settings, use the Write procedure (p. 23). Press [EXIT] to return to the Play screen.

Making the Assign On/Off Setting

This selects the eight Assign ON/OFF settings (ASSIGN 1–8). Only set the assigns you will be using to “On.”

* Be sure to set any Assign settings not being used to “Off.”

1.Press [PEDAL ASSIGN].

2.Press PARAMETER [ ] [ ] to select the Assign ON/OFF setting screen (ASSIGN 1–8).

3.Press [PEDAL ASSIGN] to set the function to ON or OFF.

The setting is toggled between “On” and “Off” each time [PEDAL ASSIGN] is pressed.

Making Settings Instantly (Quick Settings)

Using Quick Settings lets you quickly finish making the settings to the parameters described below, without having to set them all individually.

As you rotate the PATCH/VALUE dial in the Quick Setting screen to select the prepared pedal settings, the most appropriate values for related parameters are selected instantly.

•PATCH LEVEL

•PREAMP GAIN

•OD/DST DRIVE

•DELAY LEVEL

•CHORUS LEVEL

•REVERB LEVEL

•MASTER BPM

•SUB EXP FV

Controlling Foot Volume with the External Expression Pedal

•SUB EXP PS

Controlling Pitch Shifter with the External Expression Pedal

48