Contents
Controlling Effects with the |
|
External Pedals, and External MIDI Devices | 48 |
Making the Assign On/Off Setting | 48 |
Making Settings Instantly (Quick Settings) | 48 |
Making the Parameter Settings | 49 |
Controlling Foot Volume and Pitch Shifter |
|
with an External Expression Pedal | 51 |
Chapter 6 |
|
Using the Customize Function | 52 |
Making “Custom” Overdrive/Distortion Settings | 52 |
Making “Custom” Pedal Wah Settings | 53 |
Chapter 7 |
|
Using Sound On Sound | 54 |
Chapter 8 |
|
Convenient Features of the | 55 |
Outputting Sounds Without Effects Applied (Bypass) | 55 |
Using the Expression Pedal Even When Bypass Is in Effect | 55 |
Switching Bypass On and Off | 55 |
Connecting Directly to a Recording |
|
Mixer or PA Mixer (XLR Balanced Output) | 55 |
Switching the XLR Output Connector Signals | 55 |
Quick Patch Volume Adjustment (EFFECT LEVEL Knob) | 56 |
Tuning the Bass | 56 |
Turning the Tuner Function On | 56 |
About the Display During Tuning | 56 |
How to Tune | 57 |
Changing the Tuner Settings | 57 |
Adjusting the Overall Sound to Match the Usage |
|
Environment (Global) | 58 |
Using the Digital Out | 58 |
Adjusting the Output Level from DIGITAL OUT | 58 |
Checking the Effect Output Level with the Level Meter .... | 59 |
Chapter 9 |
|
Other Functions | 60 |
Adjusting the Display Contrast (LCD Contrast) | 60 |
Limiting the Banks That Can Be Switched (Bank Extent) | 60 |
Setting the Timing Used for Switching Patches |
|
(Patch Select Mode) | 60 |
Selecting Patches by Directly Specifying the Bank and Number.... | 60 |
Setting the Timing Used for Switching Patches |
|
(Patch Change Mode) | 61 |
Setting “Expression Pedal Hold” | 62 |
Selecting the PATCH/VALUE Dial Function (Dial Function)... | 62 |
Setting the Knob Functions (Knob Mode) | 63 |
Setting the External Foot Switch Functions |
|
(SUB CTL 1, 2 Function) | 63 |
Chapter 10 |
|
Using MIDI | 64 |
What Can You Do with MIDI? | 64 |
Making the Settings for MIDI Functions | 65 |
Transmitting and Receiving MIDI Data | 67 |
Transmitting Data to an External MIDI Device (Bulk Dump)... | 67 |
Receiving Data from an External MIDI Device (Bulk Load) | 68 |
Setting the Program Change Map | 69 |
Initial Program Change Map Settings | 69 |
Enabling/Disabling the Program Change Map Settings |
|
(MIDI Map Select) | 70 |
Changing Patch Numbers on an External MIDI |
|
Device From the | 70 |
Appendices | 71 |
About MIDI | 71 |
How MIDI messages are transmitted and received | 71 |
Main types of MIDI message used by the | 71 |
About the MIDI implementation | 72 |
Factory Settings | 72 |
Restoring the Factory Settings (Factory Reset) | 73 |
Adjusting the Expression Pedal | 73 |
Troubleshooting | 74 |
Error Messages | 75 |
MIDI Implementation Chart | 76 |
Main Specifications | 77 |
Index | 78 |
6