Clarion Platinum Sound Processor manual II. Headpiece & Cable, Single-Unit Headpiece, Color Caps

Page 10

Headpiece & Cable 5

II. Headpiece & Cable

Single-Unit Headpiece

CLARION’s single-unit headpiece integrates the system’s microphone and transmitter in an attractive headpiece, which is easily worn behind the ear.

Your headpiece is held in place by a magnet, which lines up with an internal magnet that is located in the implant. When placing the headpiece on your head, the headpiece centers itself as the two magnets attract each other. If the headpiece does not couple with the implant correctly, the red LED indicator (on the Processor) will flash once per second (and the alarm will sound if this feature is activated) when the Processor is turned on until lock is obtained. The headpiece comes with an adjustable magnetic strength. Your audiologist will determine the most appropriate magnetic strength for you at the time of programming.

The microphone in the headpiece is located behind the hole on the color cap. When the auxiliary microphone is in use, this built-in microphone may remain on or shut off depending on how your system is programmed by your audiologist. The jack that connects the cable to the headpiece is located at the bottom of the headpiece.

Your headpiece should be serviced only at Advanced Bionics. Do not attempt to open or repair the headpiece base. Unauthorized opening of the headpiece base will void the warranty.

Color Caps

Your Platinum Headpiece comes with six interchangeable color caps, a Headpiece Color Cap Removal Tool to change the Color Cap, and a Headpiece Clip.

NOTE: The Headpiece magnet(s) are located under the Color Cap. Be careful not to lose the magnet(s) when changing the Color Caps. Felt disks are included with the Headpiece to secure the magnets in place and prevent rattling.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Platinum Sound Processor User Guide Contents VII. Caring for Your Cochlear Implant System Labeling Iv Platinum Sound Processor User Guide Volume Control Platinum Sound ProcessorSensitivity Control Dual Color LED IndicatorHeadpiece Jack Lock Status Audible AlarmBattery Charge Status Microphone/System StatusAuxiliary Jack Single-Unit Headpiece II. Headpiece & CableColor Caps Headpiece Clip Changing the Platinum Headpiece Color CapHold the hair over the implant flat Cable III. Batteries & Battery Charger Battery ReplacementPlatinum Sound Processor User Guide Battery Charger Platinum Sound Processor User Guide Platinum Sound Processor Kit IV. AccessoriesCarrying Cases Leather Carrying Case Harness CaseSport Carrying Case Series Auxiliary Microphone Telecoil PickupTelephone Adapter Headpiece Microphone Tester Earphones Other External Auditory Input DevicesUsing the Clarion Platinum Sound Processor Getting StartedAdjusting for Background Noise Using the TelephoneUsing the Clarion Platinum Sound Processor User hears static VI. Troubleshooting GuideNo sound heard no response from user User hears muffled or distorted soundsHeadpiece falls off Headpiece or Processor gets wetPerforming a System Check Check Battery Charge StatusCheck Lock Status Microphone and System Status Lithium Ion Rechargeable Battery Replacing ComponentsTo replace the AA Battery Case CableHeadpiece To replace the HeadpieceTroubleshooting Action Table VII.Caring for Your Cochlear Implant System CleaningProcessor Protection Implant Protection Caring for Your Cochlear Implant SystemVIII.Future Product Improvements Mailinfo@advancedbionics.com
Top Page Image Contents