Aviom A-16II manual Channel Labels, Personal Mixer Label Strip

Page 12

Aviom A-16II Personal Mixer User Guide

Channel Labels

For writing channel information or names on the A-16II Personal Mixer label surface or “scribble strip”, we suggest the using a china marker or other easily removed marking device. A china marker is designed for mark- ing on plastic, metal, glass, wood, and paper. These are available at most office supply outlets. Avoid the use of permanent markers.

Save

Recall

Group

Personal Mixer Label Strip

To clean the label writing area on the A-16II Mixer, use a soft clean cloth to remove most types of temporary marking material. For difficult-to-remove types of marking devices, a cotton swab moistened with a drop of rubbing alcohol can be used. Use the minimum amount possible to remove the writing. Be careful not to get rubbing alcohol on the surface of your Aviom products.

4

Image 12

Contents 16II Personal Mixer User Guide Aviom, Inc Important Safety Instructions Read this FirstAviom, Inc. Limited Warranty Page Table of Contents Troubleshooting Page Features WelcomeConventions Used in this Document Warranty Information Package Contents AC Line ConditioningChannel Labels Personal Mixer Label StripWhat is Category 5? Cables Used in the Aviom SystemInfinite number of A-Net components About A-Net Power Supplies Power Supply PolarityCleaning Maintenance Information A-16II Personal Mixer Personal Mixer Components System Setup Power ConnectionSystem Interconnections Audio Connections OutputsPowering Up Labeling the Channels16II Features Operational ModesGlobal Controls Tone ControlsMaster Volume Button BehaviorsAll Volumes Zero Basic NavigationNet Connectors DC Power InputPersonal Mixer Rear Panel Audio OutputsMixing Preparing to Make a MixAutomatic Mono/Stereo Plug Detection Volume and Pan Control Editing InterfacePan and Volume Controls MixingPan LEDs Linking Channels Mute and Solo Functions Spread ControlEffect of the Spread Control Solo a ChannelHeld Solo Mode Mute a Channel Unmute a ChannelCreating Groups Creating Additional Groups Changing Channel Settings Within a Group Making Changes to a GroupRemoving Channels From a Group Muting Groups Global Trim FunctionSave a Preset Making Changes to a MixVerify a Mix Memory Location Using Aux Sends to Create a Monitor Mix ApplicationsCreate a Mix With Console Direct Outputs Studio Cue System Playback Monitoring Using Console Inserts Cable InsertAdding Effects Monitor without the effectUsing a Patch Bay Thru PatchingMonitor with the effect Adding Effects to a Monitor Mix Adding Live Ambience to a Monitor MixSilent Jam Session Other Uses for the Personal Mixer OutputsRecord a Mix Page Troubleshooting Problem No audio from Personal Mixer outputsProblem Can’t change Presets Problem Can’t hear a Channel that is part of a GroupPage Problem I don’t think my Preset was saved Problem In Group mode, I can’t select a new Channel16II Personal Mixer Specifications Digital to Analog ConversionIndex Page Page UPS Page Aviom Warranty Registration