Aviom A-16II manual Global Controls, Tone Controls

Page 23

selected Channel (or Group) is audible while the rest of the mix is muted.

Two Solo modes are available; the standard Solo Mode works with one channel at a time. Pressing any other interface button exits Solo Mode.

Held Solo mode remains in Solo as channels are selected. Pressing the SOLO button again cancels the Held Solo mode.

Save Mode — This mode is activated by pressing and holding both the RECALL and GROUP buttons. When both buttons are held down, the Save Mode is active. Pressing any numbered button while still holding this button combination will save your current mix to that Preset location.

Note: A Preset is saved when the numbered button is released.

Global Controls

The three knobs in the upper right section of the A-16II Personal Mixer affect your mix volume and tone directly. The Bass, Treble, and Master volume controls are always active, regardless of the selected Preset.

Tone Controls

Use the Bass and Treble controls to change the overall balance of bass or treble frequencies in your mix. These controls affect the entire mix, not the individual Channels.

The default position for the BASS and TREBLE knobs is at 12 o’clock. To add more low frequencies to your monitor mix, turn the BASS knob to the right of the 12 o’clock position. To remove lows, turn the knob counterclockwise past the center. To change the high-frequency content, follow the same

15

Image 23
Contents 16II Personal Mixer User Guide Aviom, Inc Read this First Important Safety InstructionsAviom, Inc. Limited Warranty Page Table of Contents Troubleshooting Page Conventions Used in this Document FeaturesWelcome Warranty Information AC Line Conditioning Package ContentsPersonal Mixer Label Strip Channel LabelsCables Used in the Aviom System What is Category 5?Infinite number of A-Net components About A-Net Power Supply Polarity Power SuppliesCleaning Maintenance Information A-16II Personal Mixer Personal Mixer Components Audio Connections Outputs System SetupPower Connection System InterconnectionsLabeling the Channels Powering UpOperational Modes 16II FeaturesTone Controls Global ControlsButton Behaviors Master VolumeBasic Navigation All Volumes ZeroAudio Outputs Net ConnectorsDC Power Input Personal Mixer Rear PanelAutomatic Mono/Stereo Plug Detection MixingPreparing to Make a Mix Editing Interface Volume and Pan ControlPan LEDs Pan and Volume ControlsMixing Linking Channels Solo a Channel Mute and Solo FunctionsSpread Control Effect of the Spread ControlHeld Solo Mode Unmute a Channel Mute a ChannelCreating Groups Creating Additional Groups Removing Channels From a Group Changing Channel Settings Within a GroupMaking Changes to a Group Global Trim Function Muting GroupsMaking Changes to a Mix Save a PresetVerify a Mix Memory Location Create a Mix With Console Direct Outputs Using Aux Sends to Create a Monitor MixApplications Studio Cue System Playback Monitoring Monitor without the effect Using Console InsertsCable Insert Adding EffectsMonitor with the effect Using a Patch BayThru Patching Adding Live Ambience to a Monitor Mix Adding Effects to a Monitor MixRecord a Mix Silent Jam SessionOther Uses for the Personal Mixer Outputs Page Problem Can’t hear a Channel that is part of a Group TroubleshootingProblem No audio from Personal Mixer outputs Problem Can’t change PresetsPage Problem In Group mode, I can’t select a new Channel Problem I don’t think my Preset was savedDigital to Analog Conversion 16II Personal Mixer SpecificationsIndex Page Page UPS Page Aviom Warranty Registration