Aviom A-16II manual Held Solo Mode

Page 32

Aviom A-16II Personal Mixer User Guide

selected Channel alone without disturbing the rest of the mix. Two types of Solo mode are available; one functions on a channel by channel basis, the other (called Held Solo) remains in force until the user exits it.

Solo mode works on the currently selected Channel or Group. To use Solo mode, first select the Channel you want to hear alone. Its red button LED should be lit. Now press the SOLO button, found in the pair of buttons in the upper right corner of the Personal Mixer. The Channel is now heard solo.

You can make changes to volume and panning when a Channel is in Solo mode. All changes happen immediately. Consider Solo mode as a tempo- rary state only. You cannot save a Preset with a Channel in Solo mode.

Only one Channel, linked pair (or Group) can be in solo at a time. To exit Solo mode, simply select another Channel or press the SOLO button again to exit.

To select a different Channel for auditioning in Solo mode, remember that you must first select a Channel and then press the SOLO button to enter Solo mode.

Held Solo Mode

This Solo mode allows Channels to be soloed in succession without exiting the Solo Mode. This is in addition to the regular Solo Mode behavior that allows the user to exit Solo Mode by pressing any other interface button after soloing a Channel. Held Solo Mode is indicated by the flashing of the Solo LED.

To use Held Solo Mode, you must start from Mix Mode (that is, no Chan- nels are currently soloed). The Recall, Group, and Solo LED’s should be off.

To use Held Solo Mode:

•Press and hold the SOLO button.

•While holding down the SOLO button, press and then release any Channel button.

•You can now release the SOLO button. (If you release the

SOLO button before releasing the Channel button, Held Solo Mode will not be engaged.)

•The Channel that you pressed is now soloed, and the Solo LED is flashing.

•To solo another Channel, press any other Channel button.

•To exit Held Solo Mode, press the SOLO button again.

You can also exit Held Solo Mode by pressing the RECALL, GROUP, or MUTE buttons.

24

Page 31 Page 33
Image 32
Page 31 Page 33
Contents 16II Personal Mixer User Guide Aviom, Inc Important Safety Instructions Read this FirstAviom, Inc. Limited Warranty Page Table of Contents Troubleshooting Page Conventions Used in this Document FeaturesWelcome Warranty Information Package Contents AC Line ConditioningChannel Labels Personal Mixer Label StripWhat is Category 5? Cables Used in the Aviom SystemInfinite number of A-Net components About A-Net Power Supplies Power Supply PolarityCleaning Maintenance Information A-16II Personal Mixer Personal Mixer Components System Setup Power ConnectionSystem Interconnections Audio Connections OutputsPowering Up Labeling the Channels16II Features Operational ModesGlobal Controls Tone ControlsMaster Volume Button BehaviorsAll Volumes Zero Basic NavigationNet Connectors DC Power InputPersonal Mixer Rear Panel Audio OutputsAutomatic Mono/Stereo Plug Detection MixingPreparing to Make a Mix Volume and Pan Control Editing InterfacePan LEDs Pan and Volume ControlsMixing Linking Channels Mute and Solo Functions Spread ControlEffect of the Spread Control Solo a ChannelHeld Solo Mode Mute a Channel Unmute a ChannelCreating Groups Creating Additional Groups Removing Channels From a Group Changing Channel Settings Within a GroupMaking Changes to a Group Muting Groups Global Trim FunctionSave a Preset Making Changes to a MixVerify a Mix Memory Location Create a Mix With Console Direct Outputs Using Aux Sends to Create a Monitor MixApplications Studio Cue System Playback Monitoring Using Console Inserts Cable InsertAdding Effects Monitor without the effectMonitor with the effect Using a Patch BayThru Patching Adding Effects to a Monitor Mix Adding Live Ambience to a Monitor MixRecord a Mix Silent Jam SessionOther Uses for the Personal Mixer Outputs Page Troubleshooting Problem No audio from Personal Mixer outputsProblem Can’t change Presets Problem Can’t hear a Channel that is part of a GroupPage Problem I don’t think my Preset was saved Problem In Group mode, I can’t select a new Channel16II Personal Mixer Specifications Digital to Analog ConversionIndex Page Page UPS Page Aviom Warranty Registration
Top Page Image Contents