device. It does not indicate that all devices in a system are properly connected, however. If you have two Personal Mix- ers connected together, the second Personal Mixer’s
•Check that the
Problem: A Preset was saved with a stereo link active but when the Preset is recalled the channels are mono. (Or, a Preset was saved with mono channels, but on recall the Channels are linked.)
Possible Solutions:
•The status of the stereo link is set by the Link switches on the input module. If a Preset is recalled and the position of the Link switch is different from when the Preset was saved, the Preset will be adjusted to agree with the current hardware settings on the input module’s front panel. If this happens, simply change the position of the Link switch on the input module. Your current mix will be updated immediately.
Problem: A Channel was assigned to one Group and now it is suddenly part of a different Group.
Possible Solutions:
•When you link a pair of channels with the Link switch on the input module after a Group has been created, it is possible that channel characteristics could change. This in- cludes the volume, pan, mute status, and Group assignment. The rule to remember is that the
Problem: When editing a Group that contains a large number of Chan- nels, it seems like all of the LEDs are pulsing.
Possible Solutions
•This is a normal effect of the
41